1000BASE-T SFP to RJ45, 1.25G SFP-T Gigabit SFP Copper RJ45 Module Mini GBIC Transceiver for Ubiquiti UF-RJ45-1G, Supermicro, Netgear, Broadcom, Other Open Switches, up to 100m
-
RJ Christian
> 24 hourDoes what its supposed to
-
GEORGE
> 24 hourIt gets hot but works as advertised putting it in the netgear nighthawk router 10sfp port Might get the 10gbe rj45 sfp later when getting my nas
-
Kris
> 24 hourThese have been great. I have them set up in LACP with my headless server. The switch is a TP-Link TL-SG2210P.
-
Jeremy Spring
> 24 hourThis product worked perfectly at less cost than many of the other options. Great buy!
-
T. Henderson
> 24 hourVery simple to use actually. I bought to use in a ubiquiti udm pro because the wan uplink was dropping occasionally. This fit the bill perfectly and stopped the issue setting this up as a second wan port. Ubiquiti did eventually fix the issue with the regular rj45 wan wroth a firmware update. So I moved this module to a netgear Poe switch with two sfp ports becauseI didn’t want to use a Poe port for uplink. I must say it works excellent there as well. Plan on getting another one of these to put in the Unifi again as I will have redundant internet soon at home!
-
Kevin Balmore Pino Palacios
> 24 hourExcelente inversión
-
Marc
> 24 hourOrder the Cisco variant. Worked perfectly in my Araknis 8-port Gigabit POE switch, model AN-300-SW-8-POE. Ran file-copy tests from my laptop to my QNAP NAS and it runs a full speed in both directions It does feel like it runs on the warm side. I will update my review if I encounter any problems.
-
George Arnold
> 24 hourThis adapter worked great in my Ubiquiti switches. I used it to convert the SFP ports to RJ45 to connect my residential cable modem to the switch.
-
CanAm Dude
> 24 hourI installed it into a Ubiquity Unifi switch 8-150w. Great way to add an additional port to the switch. Simple install and no config needed...just worked. :)
-
Marcin P Depinski
> 24 hourWorks in my mikrotik rb2011 wifi router to give me an extra gigE port. Clip is a bit cheap. Brass colored but plated plastic or aluminum.
|
|
|
|
|---|---|---|
Performance TestAll our products are manufactured under strict quality control system. And Every module had been tested one by one before shipping, to ensure compatibility with switches and routers. |
Low Power ConsumptionRJ45 interface link Cat 5e cable, reach 100-Meter, 1.25Gb/s data rate. Less than 1.05W power dissipation and heat-conducting gasket provide superior heat dissipation function to increases its service life, and save costs wisely. |
Widely UsedWidely used in fiber switches, routers, NIC, server or other fiber optic equipment with gigabit SFP interface. If you are not sure about the compatibility of your device, please feel free to tell us. |
|
|
|
|
|---|---|---|
Gigabit SFP Modules1.25G LX SFP module, 1310nm wavelength, TX Power : -9 ~ -3 dBm, RX Sens: < -22 dBm, up to 10km. 1.25G SX SFP module, 850nm wavelength, TX Power : -9.5 ~ -3 dBm, RX Se.ns: < -18 dBm, up to 550m. 1.25G SFP RJ-45 copper module, for Category 5e copper wire, up to 100m. |
Easy to Use and DurableEasy installation, plug and play, Supports hot-pluggable. Rotate the ring latch down at 90 degree angle to unlock, then pulling transceiver out from switch. High-quality metal material of housing, ensuring long life of repeated repeatedly plug and durable. |
Manufacturer and Global SalesQSFPTEK designs, manufactures and sells SFP module transceivers (1G/10G/40G/100G), customized service is available, global sales. We offer lifetime technology support. |
