2023 New Upgrade WiFi Extender Booster Repeater, Up to 8000sq.ft and 45+ Devices, 2.4&5GHz Dual Band Wireless Internet Repeater and Signal Amplifier for Home & Outdoor, Supports Ethernet Port
-
MARY
Greater than one weekExtremely easy to connect using the push button method (WPS)! Now ALL my devices work in spots that had really low wireless readings...went from 2-5 Bars!!!VERY PLEASED
-
PATRICIA
Greater than one weekPurchased to increase ability and reliability to connect to a weak wifi router signal. Works beautifully. Result is more than I could have hoped for. Great purchase.
-
Undercover Kurt
> 3 daytut was es soll. sehr gut
-
Rabs
Greater than one weekDie Kabel sind meiner Meinung nach eine gute Anschaffung, sie sind lang genug, halten bis jetzt obwohl sie viel bewegt werden und man bricht sich auch nicht die Finger (wie bei manch einem anderen Netzwerkkabel) wenn man sie aus der Dose entfernen will. Preis-Leistung mehr als gut.
-
JEREMY
> 3 dayVery easy to install, provides great wifi range in the home where its really needed. Ive only had it for about a month and no problems as of yet. Highly recommended.
-
JERRY
14-06-2025Took minutes to install, and no longer have any dead spots in my home. The wifi receiver is on the second floor, the device in on the 1st. Id say the circular range is at least a 30ft diameter
-
klinhgf
> 3 dayLove this extender. It is so pretty easy to just unplug and move. All you do is plug it in when you move it and it boots up in maybe a minute and is ready to go. My house is about 3300 square feet and we own 2 of these and they are great.
-
MARGARET
> 3 dayCompetitively priced, timely delivery, packaged well, excellent quality and a great fit.Very goodBig help in the side of the house away from router and modem
-
Ercan Sirkal
> 3 dayFunktioniert einwandfrei keine Probleme
-
ALBERT
15-06-2025It works really well and has helped my Internet connection immensely in my upstairs. Highly recommended if your router is far away from where you want to use your devices.Very easy to use and works well. Havent noticed any signal drop. I like the fact that after initial setup, I can just plug it to other locations and its ready to be used.
|
|
|
|
|---|---|---|
4*3 dBi External Antennas180° and 90° rotating antennas can eliminate dead area and improve your existing WiFi coverage. For better performance and stable WiFi network with speeds of up to 867Mbps, 2.4GHz has farther penetration while 5GHz has faster speed. |
Smart Signal IndicatorsSignal LED indicates wireless signal strength between WiFi extender and your existing router. After initial setup, you can move your WiFi extender to any electrical outlets by reading the color of signal LED. |
With Vent Hole & WAN / LAN PortAir vents on both sides enhance heat dissipation capacity of the WiFi extender and ensure a safe working environment. Its WAN / LAN Port allows the WiFi extender to act as a wireless adapter to turn a wired device into a wireless one. |
|
|
|
|
|---|---|---|
Repeater Mode - Wireless to WirelessAmplify the WiFi signal of the wireless router, extend the coverage of the WiFi signal, and effectively solve the problem of weak WiFi signal and WiFi dead zone. (Suitable for home, office use) |
Repeater Mode - Wireless to WiredConvert wifi signals into wired signals through network cables to meet the network requirements of wired electronic devices, such as TVs, desktop computers, etc., reduce the distance of network cables, and avoid cluttered network wiring. |
Access Point Mode- Wired to WirelessUse Ethernet cable to connect this WiFi booster range extender to any Internet enabled Ethernet port in your room or Ethernet port of existing router, you can create a new dual band wireless network. Excellent for using at home or when travelling in hotel rooms. |
Reminder:
- The working status of the repeater can refer to its smart indicator light.
- WiFi signal booster is only limited to increase the coverage of the wireless signal, but not to increase the speed of the network.
- When the repeater expands the signal, it does not need to plug in the network cable. It can receive the signal of the router directly by plugging it into the socket, and transmit the wireless signal.
- When the repeater is unplugged or powered off after the setting is completed, it does not need to be reset. The original configuration information has been saved, unless you manually restore the factory state.