5Aplusreprap 12Pcs Adjustable 3D Printer Ender 3 Pro Glass Clips Clamps Compatible with Ender 3/3 Pro/V2/3S, Ender 5/Pro, CR-20 PRO, CR10/10S Pro, 3D Printer Heat Bed Clips

I have an E3 with the creality glass bed. there are thinner stainless steel clips specifically for it but these add versatility because they are adjustable for different thicknesses of build plates and how tight I want to hold it down. they take up very little space on the bed and are almost as out of the way as the stainless steel ones that only work with a specific thickness of bed. they hold as well or better than regular binder clips and are about as quick to remove and install. bottom line, Im calling these a win and dont mind recommending them. just dont overtighten, they are aluminum and you can strip the threads without too much torque.

The spring steel clips that come with this kit are similar to the two provided by the OEM for my 3d printer. The original clips loosened up and allowed the glass bed to move around creating very interesting 3d prints. I suppose adding a few more clips around the all four edges would solve the problem but this screw clamp looked like a better solution. In the end, I used both the clamps and the screws in order to secure the glass bed. The screw clamps work well on the front and back of the bed. The clips work well on the sides where there is less clearance. Note that the screw clamps extend downwards quite a bit so when installing, move the bed all the way forward and backwards to be sure the clamps dont hit anything on the frame. The clips are unremarkable, but the screw clamps are nicely machined and finished. I applied them with the screw positioned under the bed. The springs keep the screws from backing off due to vibration. I havent used the printer long enough to see if this is sufficient to keep the clamps secured. I will be checking on the clamps from time to time. Overall the combination of clips and clamps worked well for me.

These hold the bed in place like a rock, look good and if placed right only sorry of get in the way. The underbed height is tall and can get in the way of the levels. On top they have a minimal profile but be careful if the nozzle is too low it will catch and make some unpleasant noises. That being said Id still buy them over the cheap clips.

I originally bought these to have something nicer looking and more low profile to hold my magnetized flexible build plate after I used it at too high temps for a little while and it lost magnetism. However these WILL NOT work for thin build plates unless you add something in between to buffer them, on their own they just dont reach. However they work great for the stock ender 3 glass bed and the replacement G10 sheet I got on amazon, I use them with the G10 often. The only other complaint that I have is that they leave a blue stain under the clamp top and it spills out. It doesnt change anything functionally but its still kinda strange and undesirable.

Havent used them yet but looks good

These arent a lot smaller than binder clips but the difference is quite noticeable: no more snags on fan duct similar to thing #2814127 = no more launched clips = no more bed slippage = fewer failed prints. Does take a bit longer to remove/replace glass bed & felt expensive to purchase up front, but Ive spent just a much on binder clips over the past few years and probably have already broken even on filament costs just from fewer failed prints. Ive put these on 2 of our 3 printers now. Only reason not all 3 is the magnetic bed in the third has never presented a single reason to consider anything else.

I like this works great went you glass bed

The clips are exactly what one would expect, no surprises. Good hardware holding it down

Work great on my ender 3 v2. Recommend

Good replacement for the original clips