If you are needing a way to connect your airtags to your luggage (inside), or other item, these work extremely well. We plan to use them in our luggage for a couple of long trips - planes, buses, cars, etc. It will allow us to stick one in each suitcase/carryon and be able to make sure they make it to our locations with us. If lost, we will be able to locate them. I was concerned about placing the Airtags loosely in a bag, but this is a great solution to make sure they stay with your case, and our of the way of your clothes, etc.

Stuck inside 2 suitcases with Airtag and survived trip with no problems. Needs to be stuck firmly to the inside shell of the suitcase. Most suitcases have a liner against your clothes. This needs to go behind the liner on the inside of the shell. I cleaned the intended spot near the top underneath the handle area. Pressed holder in place for approximately 1 minute. Recently went to Colombia South America from Phoenix AZ. We had 2 airlines (United & Copa) and 2 layovers so the bags were handled multiple times. Checked inside suitcase after arrival and was still firmly attached. Simply unscrew cover to remove Airtag if desired. Highly recommend

Great value, perfect fit and double sided tape is strong.

The casing is a flexible plastic, and they feel relatively sturdy. The key feature of these tags is that you may unscrew the lids when its time to change the battery, which is impossible with some other tag cases.

I use these in my vehicles.

Excellent AirTag case! Using these on my boat and jet ski. Perfect to conceal in hidden areas to protect your investment.

I love this case because its so inconspicuous when I throw it in my camera gear bags and cases. With hard cases that I own, I can easily affix them with the adhesive without worrying too much about them bouncing around. For me, I think its important with my camera gear not to have them be noticeable because if my bag were to be jacked, I think they would definitely toss the airtag out. When I toss it in my gear bag, the black case blends in with the lens hoods, filters, memory card cases, and other small things that just dont jump out at you. It could practically pass as lip balm.

Small and inconspicuous, these simple little airtag holders are just what we were looking for. They come with a 3M tape mount and screw together. The plastic outside could be painted to match any color you need. There is slight padding inside to cushion the air tag and the two units screw together. There is no seal, so I didnt test the waterproof claim.

Muy buena inversión

I used one of these cases to hide an AirTag in my car and it worked perfectly. The adhesive is very good, and the AirTag fit as it should. The case has a cap that unscrews from the other half, so you can leave it attached and still remove the AirTag to change the battery. This was not shown in the photos, and was a concern I had regarding replacing the battery. Also since the cap does unscrew, I am not sure how itll hold up if you stick it to the outside of a car, bike, skateboard, whatever considering the vibration. You may need to add some thread locker or a tiny bit of glue so it does not vibrate loose. Mine was on the inside of my car so not a super big concern for me.