Antec NX410 ATX Mid-Tower Case, Tempered Glass Side Panel, Full Side View, Pre-Installed 2 x 140mm in Front & 1 x 120 mm ARGB Fans in Rear (White) (9734088000)

I ordered it for my son and no idea if he likes it or not.

Great case that can be very versatile for your cooling setup. I bought a 5 pack of Arctic P12 140mm fans, 3 of which are mounted in front and two on top (front pulling air in, the rear top fan acting as exhaust). This setup allows for great airflow, and with a little fan management tweaking, can let you optimize your system for your ideal noise/performance balance. Pros: Great case that fits nearly anything you can throw at it. The case comes with x2 140mm fans mounted in front, and a rear 120mm fan. The front fans are 4 pin PWM, while the rear is rgb and 3 pin. The top offers plenty of length to mount 2 140mm fans or a 280mm AIO. I have a 300mm long gpu that fits just fine. There is another 25mm before the gpu would interfere with the thick fans I have in front. If you go with slimmer fans you’d have more wiggle room. Case also includes a PSU filter, and a 280mm filter for the top. Cons: The front of the case is a tight squeeze for x3 140mm fans. My top front fan begins to interfere with the I/O ports on top of the case. Also, the mesh front of the case doesn’t extend to the bottom of the case. Consequently, only a portion of my bottom front fan is not obstructed. As noted in other reviews, the case includes a hard drive tray in the bottom front of the case. However, most PSUs and their cabling will require you remove that tray. There are still two 2.5” drive mounting points on the backside of the mounting for the motherboard. But if you like a ton of 3.5” and/or 2.5” storage, it might get tricky. Final thoughts: I’d recommend this case for anyone that doesn’t need 3.5” drive storage, more than 2 2.5” drives, or needs more than a 360mm radiator. I use M2 drives and 1 2.5” drive, so fits me perfect. Currently all air cooling, but have the option to upgrade to a 280mm (not 240) AIO, which would be more than capable for all but enthusiast overclocking. For the price, this case is an amazing value.

I love the fans that come with this, but in order to mount ssds youd need to take off those fans because it blocks the ssds. I had to take some things out of the case for everything to fit. The hard drive bay area was too small so I had to take that part out and my hard drives and SSD are tucked to the side, its ugly but gets the job done. The case didnt come with gpu screws and if the ones in the bag were it, they didnt fit so I had to modify one of my collectibles to hold up my GPU and ziptoed the GPU to the case to try to get it not to sag. I love the magnetic dist collectors, makes it easy to clean. Theres not a lot of space to work on, so people with bigger hands or anything bigger than a 3050 may want to look elsewhere. Good case for the price.

Its my ideal case, and its an excellent value. The top of the case is magnetic, as well as the door. I adore that. I wish you guys well with this case!

Fans are nice and quiet and have a good range of color variation. I was very impressed with the magnetic tempered glass side panel. cable management was fairly easy with enough room for my custom cables in the rear without bowing out the panel. looks very smart for my budget build that included an MSI b450 tomahawk, Ryzen 5 3600, and an MSI 1060 gaming x 6gb. I am very happy with this purchase.

Although the dimensions of the case were listed, i did not expect such a TALL case, especially since it is advertised as a Mid-Tower Case! Nonetheless, the case looks modern, and was quite easy to build in. My only gripe was with the PCI-e brackets, as i found it a little difficult to screw in my GPU, because of the mechanism used. PLEASE NOTE: the included RGB fans are powered via the Molex connector, and therefore run at full speed, so i decided to go with white LED PWM fans, as i prefer to have control over the speed and noise level of the fans.

Feels like a more expensive case, comes with several stock fans which are good enough. For the price, you get a great product. The tempered glass side panel is secured with hinges and a magnet and this is a featur that was previoulsy found only on high end cases. The glass panel can also be easily removed by simply lifting off of the hinges, this makes it easy to build in. Cable management in this case is also easy as long as you use a little bit of common sense and reasoning during the build. Supports up to 280mm rad on the top and this case has potential to make for a quality water cooling build.

My very first PC build almost 20 years ago was an Antec case and they have come along way since then. I am very very happy with this purchase. Aside from the fact that I picked this up on Prime day at a super low price, there are several things I liked. First, the three included case fans push air very well and the lights are adjustable using the reset switch on the front panel. Second there are ample places to install hard drives unlike other budget cases. Third, in order to get access to the inside, the tempered glass side swings open. This feature is super convenient and there is no need to grab a screwdriver. The case overall seems to be made of decent quality materials and it doesnt have a cheap feel to it. I would definitely buy again.

I have to admit, I was a bit skeptical about the Antec PC Gaming Case when I first heard about it. I mean, who needs a case with RGB fans, right? But boy, was I wrong! As soon as I turned on my computer, I felt like a real gaming superstar. I mean, I might not be very good at video games, but at least I look cool doing it! Plus, the case was super easy to work with. As someone whos not very tech-savvy, I appreciated that the cable management system helped keep all my cables organized and not looking like a rats nest. And the tempered glass side panel is a great feature, so I can show off my cool build to anyone who walks by (even if they dont know what theyre looking at).

Great product.