ANYCUBIC 3D Printer Resin, 405nm SLA UV-Curing Resin with High Precision and Quick Curing & Excellent Fluidity for LCD 3D Printing (Grey, 1kg)

Used this resin to print 1/8 scale model motorcycle parts. Pieces turned out great and cleanup with alcohol is the most ideal method to use. Very happy with my purchase!

this Resin is very good this is what I have used since i bought my Proximo 6.0

Print quality is good. However I bought these on sale and it’s on sale for a reason. I bought 12 bottles because it was a good deal. But after looking at expiration date, I’ve only got 3 months left to use it. Not sure if it will lose its ability to cure right. But after reading on multiple websites. This stuff should be good for a year. Well I’ve only got until November based on the date on the bottles.

I have used the entire bottle of resin at the time of writing this review, and a few models I have printed are shown. Overall, I would give this resin a 4.75/5, as the only print failures I experienced were due to underexposure on thin supports on my end. In regards to the odor others have noted, it appears to me that the Grey colored resin has next to no noticeable odor, and cleans up nicely. My only downsides of note would be that this resin really likes to stick on, so using a soft toothbrush is a major necessity. That said, so long as you properly wash your prints and then let them air dry before curing, youll be happy printing. I have had no prints detach from the build plate during any of my prints, including my larger dragons,

I find this resin is excellent for miniature details. I also find it pretty durable and cleans nicely. I usually cut off the supports before curing since the contact points are still slightly rubbery and softer and it usually comes out with a cleaner surface. Using 8 second per layer and 60 seconds for the bottom layers seems to work perfectly on my Photon. I rarely have issues with failed prints and in all cases I messed up adding the supports where needed and once adjusted the pieces print great. Adhesion to build plate is no problem. I am also amazed at how small some of the details are that it can print provided it is supported. When cured it has a great surface for painting as well. The pictures above are of 1/72 scale Mandalorian , Razor Crest and Droideka printed on the Photon. You can see how fine the cables on the Droideka are.

I watched a ton of videos online before moving from FDM to SLA. One thing I expected was the resin to be a headache- smelly, nasty, finicky, and expensive. To my absolute surprise and delight, this resin has been none of those. It hardly smells at all- we keep our printer on the dresser of our bedroom, and even with the bottle open or the cover off the vat, I can barely smell the resin from 5 feet away. And the resin has printed like a dream. My wife, who never got into 3d printing with FDM because she thought it was too challenging technically, has commandeered the SLA printer and has now run through several bottles, and is absolutely loving it. The price is great too. All around glad I bought this resin.

I have a Peopoly Moai SLA printer that uses a laser. I was not expecting much considering that this resin is designed more for an LCD printer. I also wasnt expecting great performance at this price range. I was completely blown away at the print quality. It is orders of magnitude better than what I was expecting. The prints were so good that at even 40μm, I could see the polygons in the very small print that I took pictures of. I found my resin from now on. Great price and amazing performance. A note to people who have laser SLA printers: You can use this LCD resin with your laser SLA as long as you understand that the 405nm laser light is far stronger per area than LCD. As such, you will need to lower your laser power by a lot. Know what your laser power is and you will need to experiment. The laser on a Peopoly Moai is 150mW. I reduced my power down to 52% with the black resin and it seemed to print just fine. The color of resin will also affect how this resin polymerizes under laser radiation. The second note: I would recommend NOT using LCD resin with a laser SLA printer unless you are using a FEP film vat. If you are using a vat lined with PDMS, it will most likely tear and damage the PDMS layer. FEP film OLNY if you intend to use this resin on a laser SLA printer.

Came fast and product was very good

I get the same resin every time, started getting it delivered monthly.

Title says it all. Prints nicely, sticks to build plate well, nice fidelity to resolution. However, it isnt opaque (hollowed out model), and is really a pain to clean. Requires lots of alcohol to clean the model, and unfortunately, the alcohol seems to soften some surface details too.