ANYCUBIC Wash and Cure Station, Newest Upgraded 2 in 1 Wash and Cure 2.0 Machine for Mars Anycubic Photon S Photon Mono LCD SLA DLP 3D Printer Models UV Rotary Curing Resin Box

I really love this piece that I bought from Anycubic. I just filled it up about halfway with 99% IPA and have been using it for about two months. Cleans really well, and the uv curing is super simple. Would definitely recommend this.

If youve made the decision to invest in your own resin 3D printer, do not think twice, get this wash and cure station. Youll immediately have more confidence knowing that you will have everything you need from step one to make successful prints right at home. With the safety features and ease of operation between washing and curing, you will enjoy this process. Models will be durable and hardened within minutes and will look great on display for many many years.

That photo is of my 4th build plate. I had a good first build, and that gave me a nice boost in confidence that at least I had set up the printer correctly and it was pretty easy to do so. I did not know much about 3D printers, but I love to paint figures, and minis, and warhammer, etc. but the figures can be VERY pricey and I also was interested to see if this was viable as a product line for my business too. Honestly I am VERY impressed. This printer although on the smaller side is fantastic and works really fast too. It has very high detail and although those are just my successes I urge everyone go get Lychee Slicer software it works really well, but make sure and check for islands, run the auto-support module, fix the issues, test, etc. if you get a fail its one of a few things. Build plate is not getting the 1st layer, which means the supports are bad and you dont have a solid platform to catch the build plate. This could also be due to exposure time, but if you put that resin type in your slicer software usually it can help sort that out. Second reason is bad resin, or unleveled build plate/platform. Short of that, it could be a bad model or file, so always remember to get your files from good sources.

It was a great printer it came shipped perfectly it works perfectly I just think it’s too small for any competitive printing but for the price point it’s perfect

I love this thing , takes all the clutter on my print station, all in one champion

This thing makes washing cure resin prints so easy. I used the dunk rinse for the longest time and a UV light to cure my prints. I got this and all i have to say is wow. You take your build plate straight from the printer to the wash station run it through the wash and then sit it to the side let it dry. Next you put you print on the tun table and set it cure and let it go. I wish i would have had this when i first got my Photon S it would have made my life so much easier. This is one of the best things i have bought for resin printing it has mad my life so much better. The only thing i can say is grab it while they are in stock you will not regret it.

Im brand new to 3d printing and all of the Anycubic equipment has been very easy to use. I would highly recommend it for anyone interested in 3d printing...

I bought one and the motor made a terrible noise and it would quit spinning after about five seconds. I figured it would take some time to return it or have them send send me parts so I just bought another one to use while that was being worked out. The second one came and I tried it. It didn’t work either, it had its own set of problems. I contacted the company they said they were sending parts and I never received anything for either unit. I have the Photon printer and it is a good little printer. As far as the washing machines go, quality control is crap, they should never have shipped either of the two units. The problems are very obvious. ZERO STARS in my book but the rating system made me give it at least one. Save your money and buy something else and something that has some decent customer service.

It works great, you can set the cleaning time in 2 minute increments. Ever two minutes it will change the direction of impeller spin. I suggest always using a minimum of 4 minutes. And make sure you have 99% isopropyl alcohol. I started with 90% and it will leave a whitish milky color sometimes. Also even with 99% make sure its dry before curing. On the cure side you can set the time in one minute increments. Plenty of light and platform rotates at a good rate. Make sure you have plenty of room this thing is big and while you are washing you need someplace to put the platform and reflector sheet. When curing you have to put the wash bucket some where. My only complaint is the fact that this unit and my mono 4k power bricks have the exact same size DC barrel jacks, but they are of substantial different voltages. The wash and cure is a higher voltage. I can only assume that if you accidently plag the wash and cure station one into your printer that it would fry it. DC barrel jacks come in lots of sizes for exactly this reason. This was a power engineering choice. If you are buying this you are most likely buying an Anycubic printer or have one. Be careful with the power bricks, they look identical! That being said I do love my printer and this station and would still purchase them again. Just be careful.

This Wash and Cure is fantastic! Cuts my cleanup time down dramatically. Allows me to put my focus else where while I run two full cycles of cleaning. The interface is easy to use. Only concern I would like to be fixed is the time selection for the cleaning. I normally run two full 6 min cycles so Id like to see that increased. But overall the product is a much needed accessory. I ordered this product directly from the manufacturer and just wanted to write a review here on amazon because it would be more helpful to future buyers.