Black Opaque Glossy Acrylic Sheets, 12 x 12 Plastic Sheet with 1/8 Inch Thickness, 3-Piece Black Opaque Acrylic Blanks for Laser Cutting & Engraving Home Decor, Wall Decor

As this was an Xtool Selected product and I was using it with my Xtool D1 Pro 20W laser, I felt pretty confident this would work well. First off, it arrived in a bubble wrap envelope inside a cardboard branded box. Each sheet is masked on front and back. With acrylic being so prone to scratches, I was really happy to see it so well-protected. You get 3 12x12 sheets inside the package. The red is a bright red and glossy on both sides. Each sheet is 5mm thick. Previously, I had only tried 3mm acrylic and the 5mm feels much more substantial. This stuff is THICK. For my first try, I used the Xtool Creative Space pre-programmed settings for 5mm red acrylic. Engraving comes out a nice frosted, lighter red color that is definitely easy to read for text. The suggested cut settings also worked well and popped right out (when I had the laser focused correctly), but there is a little melting on the bottom half of the cut (see photo). Its likely not an issue for most projects, but I may try lowering the focus a bit more and/or a few other tweaks to see if I can get it a little cleaner. As with lasering all acrylics, you want to make sure you are venting the fumes properly. For the amount and quality of the acrylic, Id say this is a pretty good buy and I will definitely purchase more in colors that work with my diode laser.

These sheets are the perfect thickness for laser cutting. My husband has really gotten into this new hobby and appreciated these acrylic sheets to try out a new medium.

I used these and some red ones like them to build dividing walls under my cabinets so the under sink chemicals werent open to the pots and pans under the countertop. I cut them to size and glued them together and was able to get a nice finished product so Im happy.

I purchased this to try to make earrings with on my laser engraver. I tested out the material on both a 10watt diode laser and a 45watt CO2 laser. The 10watt did an OK job. A little rough around the edges but i think it is due to the laser limitations. I made the same item using a CO2 laser and it cut like butter. So smooth and crisp. Overall, the material was packaged REALLY well and had zero flaws. I will definitely be buying this again in the future.

Highly impressed with packaging. Secure, strong box, bubble envelope, edged precisely and smooth, pristine, pure color throughout these opaque sheets.

The best acrylic is coming from the XTOOL Select store. It’s beautiful. It’s not warped. It’s not scratched up. Just lovely and cuts perfectly with my laser. I plan on making ornaments with this, along with keychains. Acrylic cuts amazing on my laser. People love them as well.

These acrylic sheets came in a pack of 3 and are just as they were described. The color is great, however, the paper is hard to remove.

The color is very bright and beautiful. The quality is wonderful- no scratches. It came packaged great as well.

Works great with xtool easy to handle

I really like this for use in my K40 laser - it cuts and etches consistently, seems to have less of an odor, and has an interesting frosted finish on both sides. The frosting makes it a little tricky to use - since the edges are shiny and transparent, any inconsistency or irregularity of the edge is readily obvious. This is. very interesting aesthetically, but shows off your mistakes! One of my favorite features is plastic liner on one side, paper on the other. This way I can cut the paper side (protecting against fume deposits on the surface), and not have to remove it (or use blue tape) or melt another layer of plastic. I havent figured out how to take advantage of the frosted finish yet, but I look forward to finding out.