Creality Capricorn Bowden Tubing 1M, Bowden PTFE Tube for 1.75mm Filament with Teflon Tube Cutter, 2X PC4-M6 Extruder Fitting & 2X PC4-M10 Hotend Fitting for Ender 3 V2/3/3 Pro/5/CR-10/10S 3D Printer

Easy install and a big improvement from the stock tube. All my printers are now upgraded with this.

My prints came out a lot better when I swapped out the stock bowden tube with this. This is the second set Ive used, the others having been burned up by a clog in the hot end. Theres a trick to installing it. You unscrew the nozzle between a full turn and half a turn, install the tube and tighten up the nozzle again. That jams the nozzle and tube together to keep plastic from leaking out between the gap. You can see this on YouTube videos, but I forgot about it with my last Bowden tube upgrade, and got a bad clog and poor quality prints. I will always buy this for Bowden tubes.

Perfect fit

The description of the product is incorrect, it does NOT come with the extruder fitting or the hot end fittings, just the tube and the cutter.

I recently found myself in need of new tubes for my 3D printer, and I must say, these tubes exceeded my expectations in every way possible. The overall experience was so positive that I couldnt resist sharing my satisfaction with fellow 3D printing enthusiasts. First and foremost, the installation process was an absolute breeze. The tubes seamlessly integrated into my printer without any complications or extra adjustments required. As someone who values their time and prefers hassle-free solutions, this was a huge relief. The user-friendly design and clear instructions ensured a smooth installation from start to finish. Not only were these tubes easy to install, but they also demonstrated remarkable performance. I noticed a significant improvement in the overall quality and precision of my 3D prints. The consistent and reliable filament feed allowed for uninterrupted printing sessions, resulting in flawless creations. I can confidently say that these tubes have greatly enhanced the output of my 3D printer. Furthermore, the durability of these tubes is commendable. Despite extensive usage, they have proven to be highly resilient, maintaining their structural integrity even under prolonged stress. This reassurance gives me the confidence that these tubes will serve me well for a long time to come. Lastly, I must highlight the outstanding customer service provided by the seller. From the moment I placed my order to the swift delivery, the entire experience was nothing short of exceptional. Their prompt response to my inquiries and dedication to ensuring customer satisfaction left a lasting positive impression on me. As a result, I would not hesitate to order from them again in the future. In conclusion, these tubes have been an absolute game-changer for my 3D printing endeavors. Their effortless installation, exceptional performance, and outstanding customer service have made this purchase an absolute delight. I highly recommend these tubes to anyone in need of a reliable and efficient solution for their 3D printer. Trust me, you wont be disappointed!

Didnt disappoint, fast shipping, fits perfectly on my dry box

Do you have extruder issues? did you improperly change or move filament in the tube? are you scared that there is something happening in the tube that is causing you to think something is stuck in there? get this and install it. I was facing a lot and i mean a LOT of issues with the original tubing on my printer, but after changing out the extruder, and THEN the tube, I saw a clear jump in quality of my prints. While you could say that bad filament shavings could have worn down my tube, I feel in my heart that this is a necessary upgrade in the long run. the peace of mind that i have in knowing i can basically print any filament at a regulated temp without fear of weird heating makes this purchase worth it. oh, if you feel like there is tension in your printing, another fix you can try is to print out, or have someone print for you, a TUSH spool holder. That way you are reducing as much friction of possible as you pull that filament from the spool through the extruder and when it retracts. get this if you need a tube. I print reliably and understandably right now at a max of 245 for my hatchbox petg. if this was helpful for you, or if you have any further questions, let me know.

Has to replace the nozzle on my printer and wanted to replace the Bowden tube while I was at it. ( During the process also calibrated my E-steps). Just lines up the old tube to the new roll, used the supplied cutter which cut straight and easy. Swapped the fitting on the hot end and fed the new Bowden tube in while the nozzle was 1 turn out. Tightened the nozzle and off we go! Feeding any filament through this is so much smoother. The inner diameter is a closer tolerance to the filaments I use as well as it is very slippery. Feeding filament by hand through this tube is almost effortless. For the money, this has to be one of the cheapest and best bang-for-the-buck upgrades to my printer next to bed levelling springs. I even have enough left over to do my friends printer, with some left over. If I need this again for whatever reason, I will get it again.

Was more then enough for the emergency swap I needed when the stock ptfe tube needed to be replaced. The cutter that it came with was a blessing as well.

Easy install and a quality product.