













Dura-Gold - Premium - Variety Pack (40,60,80,120,220,320,400,600,800,1000) - 3 Gold Hook & Loop Sanding Discs for DA Sanders - Box of 50 Sandpaper Finishing Discs for Automotive and Woodworking
-
Speedy
Greater than one weekFor the price its ok. It clogs quick. I purchased a cheap mini DA and it came with some paper and it performed way better than this which shocked me. Ive only used the 80 grit to repair a some wheels.
-
Austin Michael Kennedy
> 3 dayI bought these sanding disks for workworking and turning items on a lathe. The disks are pretty durable and do not gum up as much as other sanding items do. I started off using the 120 grit disk on an air sander to smooth out some resin castings, then moved through the grits, up to 1000 grit, and was able to achieve minimal circles. Though, I started off dry sanding from. 120 to 320, then started wet sandi g with the 400, 600, 800 and 1000 grits. The disks cleaned up fairly well afterwards by either slapping g them across a surface or dousing in water Nd rubbing the fibers out of the grit. I have also used these for items being turned on a lathe, without the backing pad, and they conform very easily. I have not used the included wheel yet, but it should fit a 1/4 inch chuck easily. The hook side of the disks hold very well, even when soaking wet. Great sanding disks for the mo ey
-
Josh M. Rubinstein
16-06-2025I use these to sand down my heels. I know kinda cray but they work great. I use the 220 grit. Quality is great and I’d use these for woodworking but this set is specifically for foot care.
-
Erik Coleman
> 3 dayExactly as described and a little better.
-
Boba
> 3 dayDuraGold is an affordable and good sanding paper. This is nice to get the 3inch pad included. Pad works great as well. I would recommend.
-
richard kocher
> 3 daymeets my needs at a good price
-
Ronald moore
> 3 dayit works well just as good as the higher price paper
-
Pappie
> 3 dayThis has been a very durable product. This is my second order. I use until completely clogged with dust but just recently I found that with a brush, you can clean them and they work longer still. They cut well according to grade of course. I have been very pleased, used on lathing work and some power carving.
-
tom
> 3 dayGood quality
-
Ayc
> 3 dayGreat product. I used this to refinish some old dressers. It did the job perfectly.