Eastern Jungle Gym DIY Swing Set Hardware Kit with Easy 1-2-3 A-Frame Brackets, Swing Seats, Ring Trapeze Bar and All Assembly Hardware and Instructions - Wood Not Included

So i was planing to build a swing set and liked overall ratings for jungle jim products across the board. One of the the points for me was for sure saving some money when buying kit vs buying everything separately. However disappointment hitted right. after opening the box. 1) Frames are not fully painted inside in this kit. They are however if you buy brackets separately. If you planing to use pressure threaded lumber they should be painted to avoid corrosion. 2) Swing hangers are for sure heavy duty, however they dont have plastic washers AND had rust with crumbling paint out of the box. If you buy hangers of same brand separately they do have washers and i have not seen many reviews about rust if at all. 3) All hardware was zinc coated, which is not suitable for pressure threaded wood. If you buy brackets separately they do provide galvanized hardware which is good for PT lumber. Overall browsing reviews for other jungle gym products i saw similar reviews from year or two ago. Lots of recent reviews saying about better hardware and fully painted brackets. Looks like this kits probably were made a while back and do not have all the update manufacturer implemented recently. Overall very good brand. Returned this kit, however ordered everything separately as parts.

Had every thing you need for a swing set. I routed (1/2 round over bit) and sanded all the beams before assembly. The 4x4s had ample room to go into bracket. Not so much for the 4x6, took some pounding. I used a 12 footer for the 4x6 and 10 footers for the uprights to have more space between swings and to have longer swing. At first I was scared that my wife and I couldnt lift it into place, but we had no problem when it came to lifting it.

READ THIS BEFORE ASSEMBLING!!! If your 4”x6” beam does not immediately slide into the bracket, there is a trick that works like a charm. Instead of sanding or planing, first try this: with two people, stand the beam up on end, on top of the bracket it needs to slide into. Gently lift the beam and drop it onto the opening of the bracket. This will force the beam into the bracket with minimal effort compared to all other methods.

This is an excellent kit to build a swing set. EVERYTHING you need is included except the wood and stain. While it calls for a ten foot 4x6 for the cross piece I opted for a 16 footer thinking I was going to add another swing on the outside. But the angle of the legs was too much. So instead I made a 14 foot span for 4 swings (or other options) in between. You wouldnt want 4 adults swinging at the same time but 2 adults and 2 children should be fine. I selected Douglas fir for all of the wood. 1 4 x 6 x 16 for the beam and 4 4 x 4 x 8s for the legs. I sanded every piece, every side with an orbital sander 60 grit. Then I applied a heavy coat of exterior stain. We chose a light stain which turned out just a tad darker then the natural wood. The brackets just barely slid over the 4 x 6 after I pried the sides out a tiny bit. First time I tried they stuck a bit. Just a tiny spread helped the bracket slide on. This was extremely important because I attached the brackets to the 4 x 4 legs first. Then I propped the 4 x 6 on two ladders and slid the bracket with the two legs onto the 4 x 6. Which is why I made sure they would easily slide on! Doing it this way allowed me to see just how the swings would work which is when I realized they would all have to go between the legs. Then I took the legs off and measured and drilled the holes for the brackets that hold the swings. It was easier to drill the holes with it down on the ground. I attached the brackets after I put it back together. I was concerned about the brackets getting in the way when I was lifting it back up. Since I had the extra length I adjusted the measurements of the instructions. The swings on the ends are 20 inches from the outside of the brackets. Considering the legs angle out away from the swings you have 30 or more inches of room between the swing and the legs. Then I put 18 inches between each swing with 18 inches of space for each swing. Again, it was much easier to measure and drill with the beam on the ground. I put it together by myself. The beam wasnt terribly heavy to lift up onto the ladders. I lifted one end on the first ladder and the other end resting on the ground. This made it really easy to slide the the first A (bracket with legs) onto the first end. Then I put the other end onto the other ladder (I had to add about 6 2x4s to get enough height with my ladder). Attaching the other A wasnt too difficult. I just wiggled it onto the beam up to the line I had drawn. Then I drilled the 1/4 inch pilot holes and attached the brackets to the wood with the included lag bolts. The swings are good quality and the chains are coated at the part where you would grab to prevent fingers getting pinched. It only comes with enough brackets for 3 swings so I ordered another set and chair for my fourth. Its easy to attach and un-attach different swings or equipment with the included spring clips. Our grandson loves it and so do we! And it looks great, too!

The hardware kit appears very heavy duty and proved fairly easy to assemble. I did it by myself but would recommend 2 people, particularly to move to the final location, upright, and level. I used large furniture sliders to move it around on the grass fully assembled. The only thing I might do different is to make the legs using 9 ft. - 4x4s. I bought 8 boards as recommended by Eastern and now wish it were a tad taller. I had to sand the 4 x 6 top beam quite a bit on one end to get it to fit (used random orbital sander). I ended up using a 3 lb. sledge and a large block of wood (to prevent bracket damage) to get that end on. The second end required a bit of sanding but went on much easier. I also recommend a drill with a built in bubble level (mine is a Dewalt) to drill the bolt holes through the top beam for the hangers. I would have given it 5 stars but for the cost.

We are 2 months into using the Eastern Jungle Gym Classic Swing Set and love it. We replaced the trapeze for a toddler bucket seat (also Eastern Jungle Gym) for our almost 2 year old. He loves the swing & asks to swing often. I also love it and will swing for hours on end into the night. Assembly was relatively straightforward, but here are some notes: - Check the bolts & nuts. We had a bolt that was bent and went to the big orange store to get a new one. - I personally did not use pretreated wood, because Id read about the dangers of getting a splinter from the treated wood. Instead I used a standard deck stain - That same big orange store cut my 4x4s & 4x6s for me so no need to break out the circular saw. - Make sure to get a long enough drill bit to go through the 4x6. Trying to meet from either end would take a level of skill I didnt even want to attempt. - I was able to assemble the entire swing set by myself, but needed help flipping it over into place

Had it up and swinging in just a couple hours. Picked up the 4x4s and the 4x6 from the local store to avoid shipping it. Comes with more than enough hardware. Its almost like multiple kits thrown into the same box, lots of extras. It comes with the anchors to make it extra stable. Personally, I chose to hit the hardware store again to buy half inch lag bolts, rather than try to use the carriage bolts that come included, that would have required drilling through the 4x6. Everything fits snug, as you may have read, and I had the best luck using the weight of the wood itself, as a pile driver to get the brackets on. Get the brackets on a little, then tip the wood up and pound the bracket onto something solid. Easy enough for a solo job, but highly recommended to have 2+ people stand it up. I did it myself just barely... thats a lot of wood when its all together. I think I saved about $200 or so versus buying a complete kit locally.

Nice and easy set up. However I need to figure out something else with the bolts. Might have to drill completely through and use nuts and bolts. The screws/bolts that come with it keep coming loose. Not very happy with that. I know it’s probably too much. But I think instead of using a 4x6 they could have made the brackets to hold something a little bigger. Just for added stability. Watching my 12 year old daughter swing and watching the 4x6 twist as she’s swinging kind of nerve-racking

Our kids are getting older and we wanted to down grade from our massive, yard stealing play structure. Our kids no longer used the climbing wall, clubhouse and slide that we had. But they still enjoy swings. So I purchased this kit. The hardware and fittings are sturdy. We purchased the wood locally on our own. The set looks great and doesnt take up an obnoxious amount of space. With that said, it wasnt as easy to put together as we thought it would be. No complaints with the finished product though.