FivePears 1/2 Inch Shank Rabbet Router Bit with 6 Bearings Set, Adjustable Multiple Depths 1/8, 1/4, 5/16, 3/8, 7/16, 1/2 for Beginner DIY Woodwork …
-
mad4U
> 3 dayWorked well. Although I only used one bearing, it did add versatility. I put it under some rough treatment (that a router bit shouldn’t) & it stood up great.
-
Austin
> 3 dayFor the cost, you cant beat it. I have used this to make multiple rabbet joints and it has performed flawlessly. I havent had it for a long time so I can speak to how long the edge will last, but so far Im very content with the product.
-
Erik H.
> 3 dayOverall, the bit seems to be very solid and good. However, the bearings are total junk even when fully tightened they were extremely wobbly and loose and hit the blade shooting out sparks possibly defective. However, I think it was just poorly made. It has been returned. You get what you pay for!
-
woodi48
> 3 dayFirst off, I do not use these bearings in a router environment. I would if necessary, though. I do use the whole set still on the spindle with a couple of washers as spacers to balance mower blades. I found two sets online but had to have a 7/8 bearing for the center hole on my JD blades. These were the ones. Saw a Youtube video on this, and these work just fine. Couldnt believe the difference in my mowing experience after using these to balance my blades. Very inexpensive alternative to the $120-$180 super magnetic version. Very pleased.
-
Robert n.
> 3 daySeems fine. Limited use so far.
-
Marc colucci
> 3 daySo far so good. Appears to be decent quality.
-
Paul C
> 3 dayBeautiful set. I use to cut reveals in picture frames. Accurate. Very well constructed. Easy to change depth.
-
Mary Trent
> 3 dayHome wood working.
-
Kc
> 3 dayBit and collars packaged in closable plastic containers. Bit performs very well and leaves a good clean rabbet.
-
Aaron
> 3 dayThe largest sized spacer in the pack worked great, but the next size down was too much of a difference in size and I was not able to control it well enough to prevent damage to the cutter. I had to take it to a professional. Were I to try this again, I would need to source a bearing that would be 2nd largest. There was two of the same size in the pack so they could have provided an alternate size.
About us
Fivepears is committed to providing consumers with the best quality cutting tools and woodworking supplies on our entire line of products.We provide excellent service.If you have any questions, welcome to leave a message.
:
Rabbet Router Bit with 6 Bearings Set
Rabbet Router Bit with 6 Bearings Set,Adjustable Multiple Depths 1/8",1/4", 5/16", 3/8", 7/16", 1/2" for Beginner DIY Woodwork (1/2 Inch Shank)
Scope of application
It can work great with woods, MDF, particle board, etc in the most of woodworking
Teflon coated
Each bit is coated for efficient use of the router bit multiple times without compromising the quality of the bit.
Specification:
- C3 Tungsten Carbide
- 1/2 Inch Shank
- Max 18000 RPM
Product Display
It comes with adjustable 6 bearing for guide it to cut perfect rabbets.
|
|
|
|
|
|---|---|---|---|
C3 Tungsten CarbideFivepears products are made of C3 hard tungsten steel and 45# carbon steel for durability. |
Clean CuttingSharp cutting edges made of Fivepears C3 grade carbide for smooth cuts |
Shear Angle DesignFivepears" shear angle design, smooth mirror surface helps chip removal speed |
Professional bearingA good bearing can often do more with less, it can help you control the cutting speed and guide you to cut in the right direction. |
|
|
|
|
|
|
|---|---|---|---|---|---|
| FivePears 1/2 inch Rabbet Router Bit with 6 Bearings Set | FivePears Finger Joint Router Bit with 1/2" Shank | FivePears 2 Pcs of Tongue and Groove Router Bits Set | Fivepears 1/2 inch 12Pcs set | Fivepears 1/4 inch 12Pcs set | |
| Product | FivePears 1/2 inch Rabbet Router Bit with 6 Bearings Set | FivePears Finger Joint Router Bit with 1/2" Shank | FivePears 2 Pcs of Tongue and Groove Router Bits Set | Fivepears 1/2 inch 12Pcs set | Fivepears 1/4 inch 12Pcs set |
| Packing | Plastic case | Plastic case | Plastic case | Wood case | Wood case |
| Bits in set | 2 Pcs | 1 Pcs | 2 Pcs | 12 Pcs | 12 Pcs |
| Purpose | Set for cutting rabbets of different depths | Set for Finger joint | Set for Tongue & Groove joint | Multipurpose for beginner | Multipurpose for beginner |
| Shank | 1/2" inch shank | 1/2" inch shank | 1/4" inch shank | 1/2" inch shank | 1/4" inch shank |
| Material | C3 Tungsten Carbide Cutters, High-quality Alloy Steel Shank | C3 Tungsten Carbide Cutters, High-quality Alloy Steel Shank | C3 Tungsten Carbide Cutters, High-quality Alloy Steel Shank | C3 Tungsten Carbide Cutters, High-quality Alloy Steel Shank | C3 Tungsten Carbide Cutters, High-quality Alloy Steel Shank |
| Operate Speed | Max. 18000 RPM | Max. 18000 RPM | Max. 18000 RPM | Router diameter / operate speed below 1" (25mm) / 18,000~24,000 rpm 1"-2" (25-50mm) / 16,000-18,000 revolutions 2"-2 1/2" (50-65mm) / 12,000-16,000 rpm 3" or above (>= 65mm) / below 12,000 rpm | Router diameter / operate speed below 1" (25mm) / 18,000~24,000 rpm 1"-2" (25-50mm) / 16,000-18,000 revolutions 2"-2 1/2" (50-65mm) / 12,000-16,000 rpm 3" or above (>= 65mm) / below 12,000 rpm |