HANDYGO Swing Set Brackets - Heavy Duty Steel Swing Kit, 2 DIY Wooden Swing Hardware Bracket, Playground Equipment Parts, with Mounting Accessories, for Outdoor Play, Green
-
Mike S.
> 24 hourBracket was perfect, had to shave the 4x6 wood as others mentioned. (Very) Annoying but manageable. The lag bolts are inadequate for hot/ humid weather. Purchased stainless and galvanized (stainless for swings to attach to swivels and galvanized for the bracket here) plus new washers. Brackets themselves are excellent quality. The 4x4 “legs” fit just fine. Used hammer drill with socket attachment.
-
amanda gabany
> 24 hourBuilt a homade swing set and it holds adults as well as infants. I have had no problem from start to finish.
-
Tara
> 24 hourWe used these to put together a frame for a large size porch swing. They worked perfectly.
-
Wayne Redden
> 24 hourThick metal and strong hardware.
-
Mark
> 24 hourHeftier than I expected. Went together fine except for one of the screws snapped off while driving it in the top rail. I dont think the screws are exterior grade (shiny finish was flaking off to bare dirty/rusty looking metal. For the price I paid though Id probably buy them again, Id just get my own better quality fasteners instead of using what came with it. As others said for the top rail use a 4x4 attached to a 2x4. A 4x6 will likely not fit properly without extra work.
-
Justthe2ofus
> 24 hourOut with the old swingset. In with the new. No issues so far. Took about $50 of wood. The swing hooks are like $30. Cheap fast swingset that is weather shield wood, should last a long time.
-
kelly w.
> 24 hourLuv my new swing set!
-
Claudia
> 24 hourGot a really nice heavy-duty swing set for all my kids... toddler and pre-teens
-
Ohioian
> 24 hourGreat design and sturdy. These take so much time out of putting up the swing set frame. Had my frame put up within 30 mins of wood getting delivered, had the whole swing set up and in use within a couple hours
-
Mike W
> 24 hourAwesome product! Super easy to build swing set. Took under an hour to build! Used a 4x6x16 as the cross beam with 3 feet sticking off of each side. The 4x6 was dry and the brackets slipped right on to it. The 4x4s fit in with a hammer tap. Looks awesome in the yard
Swing Set Bracket Instruction Manaual
|
|
|
|
|---|---|---|
Step 1Slide the bracket until it"s flush with the wood. |
Step 2First drill holes, Than use lag bolts and washes fasten brackets. |
Step 3Repeat on other sides. |
|
|
|
|
|---|---|---|
Step 4Slide the wood into the bracket. |
Step 5Slide both side in than drill them with lag bolts and washers. |
Step 6Repeat step 1-5 on other side. |
