Kimbluth 10 Gauge Triplex Marine Wire Tinned Copper Boat Cable, 30ft 10 AWG Standard USA OFC Oxygen Free Copper Wire for Automotive Boat Speakers Solar Outdoors

Overview:

As described, fast shipping

Pliable and easy to work particularly where a lot of twist and turns are present. Couldn’t find this product in big box stores. Good product.

I ordered this because one end of our current bedroom has no outlets in it (due to previous residents half-done remodel), though there are a couple of boxes in the wall which dont have wire running to them. So the half of this 11x15 bedroom further from the doorway has no electricity unless we run long-corded plug strips down to that end of the room; the 30 feet in this roll would be enough to add a couple of outlets and at least remedy the worst of this issue! The fact that its marine grade doesnt make a difference to us, since were on an Arkansas mountain several hours drive from the nearest coast; its overkill for the projects requirements, but its wire that will work to improve our living quarters.

These are very well-built wires. I use 12 Gauge wires and definitely is thicker than the ones I have. I am not sure about the resistance but it definitely does the job. The outer jacket is split out for each wire inside which was really nice to see and feels durable.

I used this tinned copper wire to wire a boat, it worked just fine, the gauge was just what I needed. The powdered interior makes the jacket easy to peel back. The quality is good, it was easy to work with, I would order again.

Seem to be lower quality than the other brand I’ve gotten if this same thing. The outside conduit is flimsy and coming off inside as a soft powder. You can tell it’s considerably less thick than the other name brand I usually get. Don’t have time to return it so going to have use it anyway and hope for the best. At least the conduit around the wire itself seems okay.

seems solidly built for outdoor and indoor use

Work on my cars

I replaced a bunch of the wiring on a little CC. Got this wire for the bilge pump. I’m sure it will be ok, but the jacket feels really “soft”. Hard to explain, just goes to feel as “quality” as some other wire I used (Anchor, GS Power).