OEMTOOLS 25025 26 Blade Master Feeler Gauge

Between things that are very close together. Bought to gap some spark plugs. It worked, but I think Ill get a spark plug gap tool next time.

Works

Very nice set.

Ive used these to gap valves and ignition contacts and they worked well for it. They didnt scratch or warp and the machines ran well after the work was done, so sizes must be good

Ive used these several times now to adjust the valves on my H22. The angle on them is prefect to get under the rocker and it has every size you could need. After two years they show almost no sign of wear. They may be steel, but Ive left them in my tool box for years and still see no rust on them. These function much better than flat blades. I would say these are just about perfect for what they are.

Product came well packed an blades sufficiently oiled. Blades are about 2.5” long. Most importantly the blades thickness is spot on within the tolerance of my Mitutoyo caliper. I verified every single blade. The thickness number etching is good readable, however, some of the blades show a more fade etch, which is no problem as long as it holds up. Typically use these for woodworking and my old one became rusty and some blades broke over time.

This item was what I needed Perfect for adjusting valves on DOHC VTEC engines and especially on my H22. Angled blades really helped me rate product the way it was supposed to be

great price

I use this to check the relief of my guitar after I do a setup. I put a capo on the first fret and hold down the last fret then use the feeler to measure the gap at the 8th fret. I like my relief from 0.006 - 0.01 and this set has those measurements and a ton more.

I actually bought these for spark plug gap measurements, but the units provided was way too thin. What i did was stack them, and add up the blades thickness. Dont buy these for spark plug gap measurements. Great feeler blades, but not for spark plugs!