Rierdge 6-1/4 Inch Hole Saw with Heavy Duty Arbor, 159 mm Hole Saw HSS Bi-Metal Saw Drilling Tool, 6.25 Inch Hole Cutter for Cornhole Wood Plasterboard Plywood Plastic Thin Metal (Red)

I added 4 lights to the masters bedroom. Easy cuts. Went great. I also replaced 2 old mushroom lights. Those had holes from the existing curing box. I used a cut out from the other new lights and screwed it over the replacement hole to guide the saw. Worked perfect.

I ordered this hole saw to make the hole to the outside for our new microwave vent combination. It made perfect cuts through sheetrock on the inside and then vinyl siding + oriented strand board on the outside. A huge timesaver, and perfect, tidy holes for the 6 duct to run through. This particular hole saw has a clever mechanism on the heavy-duty arbor that uses pins to lock saw drum in place. A great tool for the job!

Used it to cut holes for 6 HVAC duct from basement to second floor. Easily made clean cuts through sub and 3/4 solid oak flooring. The ceiling - lath & plaster - took a minute. In fact, I think it took longer to take out of the packaging and put into drill than it did to cut the 2 holes.

The saw did the job, my only issue was it seemed a bit heavy, that may be for the best if one did not want it to wear out.

The holes in the saw dont line up with the arbor/drill pins.. returning

I purchased this to cut holes in my drywall for reassessed lighting. It worked flawlessly with my 20v dewalt impact drill cutting in to 5/8 drywall. The key is to get the drill bit right on your center mark and apply pressure. I had perfect circles when done. The only bad part is Ill probably never use it again

Cut acurate clean hole

It’s the wort hole saw ever and should be cancelled because of it I have ptsd

Strong tool

Did the job!