Solar Panel for Wireless Security Camera Outdoor,USB C & Micro USB 5W Solar Panel Compatible with Rechargeable Battery Camera, IP65 Waterproof Solar Panel with 9.8ft USB Cable

The rate features for this seem to be inaccurate. Anyways, this was the last solar panel I needed to get for all of my cameras that I have. The convenience of not having to swap out batteries for each one every few months makes this a worthwhile purchase. I will note that the panel is different than the others I have purchased in the past from different companies. This one has more of a rugged, raised diamond pattern than the others. But performs just like the others so I am pleased.

Works great I haven’t had a charge cameras since November.

Nice little pannel fir keeping my camera going without needing to change batteries all the time.

I had been going around the periphery of the house, one camera at a time, and plugging in a power bank to charge our Eufy 2C Pro security cameras. We installed one a few days ago in our backyard as our test trial. Within two hours it had boosted the charge from 53% to 63%. By sundown we were almost at maximum. For the next couple of days we watched as the morning sun restarts the charge and brings it up to about 85% by lunchtime. The kit comes with a variety of mounting hardware. By the way the Eufy security app allows you to specify solar as a power source and the apps charging indicator continually pulses. The app notified us that in solar charging mode the camera will no longer turn on the charge LED. Presumably this will improve efficiency a bit by reducing the power. We ordered a couple more for our other outdoor cameras.

I have multiple Eufy EufyCam Pro 2 cameras around the outside of my house. These were convenient because they could be recharged -- well what could make that even more convenient? Not having to charge them! I have tested this panel by using the most battery draining settings with no issues. My battery rarely drops below 80% and (as long as it is not a rainy day), is fully charged by the evening. Important note -- the more direct sunlight this gets, the faster it charges, so be conscious of your sun pattern when mounting this. If I have any issues in the future, I will update this review.

Works great for my eufy outdoor cameras

I really like this solar panel. Works perfect with my blink camera. So far so good bin using for about a week and powers my camera just fine even when it rained no issues. Installation was easy instructions give you step by step how to install which was helpful. Just make sure its compatible with your camera and you still need to have rechargeable batteries inside camera so the panel can charge them up. Overall great solar panel and works good.

I got this for one of my Wyze outdoor cameras (gen1). Installation was easy, and the included instructions were clear. The cord is nice and long. Once installed it charged my Wyze camera about 10% in one sunny afternoon. It seems like it might charge slightly slower than my Wyze solar panel does, but that could just be the location. This panel has two drawbacks compared to the Wyze solar panel. Theres no weatherproof gasket where the USB connector plugs into the camera (I might end up putting some caulk on it). Theres also no good place to wrap up excess cord. Neither are dealbreakers, but its worth considering when the Wyze panel is only a few dollars more. This one does come with a microUSB to USB-C adapter if thats something you need.

I finally got a solar charger for my camera. No more need to take it down and manually recharge the camera. The mount is simple and easy to use. Three screws and the base affixed. Screw on the adjustable arm onto the back of the panel. Screw the arm on the base, adjustthe angle and final tighten. My camera uses a micro usb port, so no need for the adapter. And the position is very close by so there was plenty of cable to coil up and tie. I can go into the app for my sannce camera and see that its charging. Overall, it was easy to install and is a well worth it time saver.

It was pretty easy to install the mount and attached/screw on the panel. The cable length is ok. I needed a longer on due to where I installed it with respect to where the device that this power, so I connected it to an extension cable. I also mount it on a metal clip that hooked into the vinyl, so I did not have to drill into the wall or vinyl siding. It seems to be holding up after a few weeks of Winter sun on a westerly facing wall and a couple of small sprinkle of snow