SpeTool Single Flute (O Flute) Spiral End Mill Aluminum Cutter Carbide Router 1 inch Cutting Length with 1/4Inch Shank for Aluminum Acrylic PVC MDF Plastic
-
Alexander
> 3 dayWorks with aluminum good
-
Mike M
> 3 dayOnly 1 cut so far but almost no cleanup after first cut
-
Jeff T.
> 3 dayI ran this faster and deeper than I thought I would be able to. Ramp into your material, and use a nice cutting/cooling fluid, and go for it. Nice bit, really.
DETAIL
SPECIFICATION
Material Use
- Aluminum/Copper
- Plastic/Acrylic/Nylon
- Softwood/Hardwood
- MDF/HDF
Recommend
Feed Rate (IPM) = RPM x # of cutting edges x Chip Load
Chip Load = per cutting edge.
IPS = Inches Per Second.
IPM = Inches Per Minute.
RPM = Revolutions Per Minute.
# of cutting edges = # of flutes.*
THE O FLUTE ROUTER BIT
Why choose O Flute
Compared to other flute styles, the cuts are cleaner, plunges are deeper and chips are easily directed up or down, depending on the type of spiral you choose. If you work primarily with plastic or aluminum, you’ll be happy to learn that heat is dispersed more easily with the O flute bit and it stops weld back
When choose O flute
If your material has a low melting point, a Single Flute Plastic Cutting End Mill is a good option. This tool has a larger flute valley than its two flute counterpart which allows for bigger chips. With a larger chip, more heat can be transferred away from the material without it melting
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| SP1FS-D1/8 | SP1F-D1/8 | SP1F-D1/4 | SP1FS-D1/4 | SP1FL-D1/4 | SP1FLS-D1/4 | |
| Cutting Dia | 1/8" | 1/8" | 1/4" | 1/4" | 1/4" | 1/4" |
| Shank Dia | 1/4" | 1/4" | 1/4" | 1/4" | 1/4" | 1/4" |
| Flute Length | 1/2" | 3/4" | 1" | 1/2" | 1-1/2" | 1" |
| Toatal Length | 2" | 2-1/2" | 2-1/2" | 2" | 3" | 3" |