Thermalright Intel 12th/13th Generation LGA1700 Anti-Bending Buckle,CPU Stress Bending Correction Fixer, Curved Pressure Plate,Fully Fitted and Fixed Without Trace Installation (Black)
-
SkoryJ
> 3 dayI didn’t notice a change to my thermals, but it makes my install look cleaner
-
Eric Ward
> 3 dayInstalled this on my Asus Maximus Z790 Hero with no problems. Used factory screws from motherboard and no issues. Make sure to tighten in criss cross pattern to make sure it tightens evenly and doesn’t bend. Highly recommend as this also lowered my CPU temps on my 13900k
-
Soheyb Weilenman
> 3 dayWas skeptical at first even after watching all the videos online about this but it really worked, dropped my temps by about 5-7 degrees on both my 12th and 13th Gen CPU’s. Recommending this to all my friends!
-
ryan
> 3 dayCombined this plate with a very slight undervolt on my 13700k and now its maxes out around 85C as opposed to thermal throttling before. 100% these plates are essential for keeping new Intel cpu temps under control.
-
peter harris
> 3 dayEasy to install and help with thermals
-
William McKay
> 3 dayDropped an average of 15C after I replaced the stock CPU bracket on my Gigabyte Aorus Elite AX. This fit very snug and secure on the 13th Gen i9 and I couldnt be happier!
-
Aurelio M
Greater than one weekWhen I bought my i7-13700K, the CPU would randomly spike to 100 °C while idle and stay at that temperature for 4 to 5 minutes. I upgraded my CPU cooler to a corsair 420 mm CPU watercooler, but the same issue occurred, although it didnt stay as long at 100 °C. The problem disappeared when I switched to the Thermalright contact frame. I also noticed an improvement in the average temperature of the CPU at idle and under load. It is clear that this contact frame helps the CPU behave in a better way, especially for a CPU that is known to overheat.
-
Elton Reynolds
> 3 dayWork as advertised, easy to install.
-
Tim
> 3 dayRather easy to install, I removed the motherboard from the case, and removed all my RAM. It might be doable without taking the motherboard out of the case but I didnt want to try it.
-
Z
> 3 dayLuckily I stumbled upon a video from Gamers Nexus highlighting these. Bought one because why not. Easy to install and it feels like my cooler is more secure than ever. I am running a z790 board with an Intel 13700k. My temps havent even needed to kick the fans on full blast yet.
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| FC140 | BA120 | AXP90 X53 | AX120R SE | AXP120 X67 | AK120 SE ARGB | |
| Heatpipe | 5×8mm heatpipes | 6×6mm heatpipes | 4×6mm heatpipes | 4×6mm heatpipes | 6×6mm heatpipes | 5×6mm heatpipes |
| CPU Sockel | Intel: LGA1150,LGA1151,LGA1155,LGA1156,LGA1200,LGA2011,LGA2066, LGA1700; AMD: AM4 AM5 | Intel: LGA1150,LGA1151, LGA1155,LGA1156,LGA1200,LGA1700; AMD: AM4 AM5 | Intel: LGA1150,LGA1151,LGA1155,LGA1156,LGA1200; AMD: AM4 | Intel: LGA1150,LGA1151,LGA1155,LGA1156,LGA1200,LGA1700; AMD: AM4 AM5 | Intel: LGA1150,LGA1151,LGA1155,LGA1156,LGA1200,LGA2011,LGA2066, LGA1700; AMD: AM4 | Intel: LGA1150,LGA1151,LGA1155,LGA1156,LGA1200,LGA1700; AMD: AM4 AM5 |
| Velocità del ventilatore | 1850±10%RPM | 1550±10%RPM | 2700±10%RPM | 1550±10%RPM | 1800±10%RPM | 1550±10%RPM |
| Altezza | 160MM/6.3in | 154MM/6.06in | 53MM/2.09in | 148MM/5.83in | 67MM/2.64in | 148MM/5.83in |