Authentic Capricorn Bowden PTFE Tubing XS Series 1M for 1.75mm Filament with PTFE Teflon Tube Cutter, 2X PC4-M6 Extruder Fitting, 2X PC4-M10 Hotend Fitting for Ender 3 V2/3/3 Pro/CR-10 3D Printers
-
CJ Beck
> 3 dayThe fittings work for one time use, the PTFE tube is not good for temperature usage but seems to be how it is being used. It gets really soft and causes issues during printing and any manufacturer using this as stock should think about how badly this stuff affects the users experience.
-
Deepdiver71
> 3 dayGood quality tubing delivered fast and in good packaging.. will buy from again…
-
Jazlyn Klein
> 3 dayAfter the tube heats up it does not allow for filament to pass. On shorter prints you may be alright but on longer ones you will have a issue.
-
Michael L Casey
> 3 dayAlways use Capricorn tube, great & easy upgrade , have zero issues with other mod done to my printers, (sadly this package had no new C clips)
-
Ryan
> 3 dayThe package only contained the bowden tube and cutter
-
Jesse
> 3 dayGives you alot 3 times worth and works good
-
Cody Brown
Greater than one weekCapricorn is hands down the best name in printing parts. The accuracy of this bowden is amazing, and it is used by most professionals.
-
MrFW190
> 3 dayNot quite enough length to make 2 tubes so I can have a spare but it definitely improved my print quality a little bit, especially for flexible filaments since those notoriously don’t so well with Bowden setups. Mine clogged after a few weeks because some of the filament I use isn’t quite 1.75mm enough in its tolerance and just got stuck. So that tells me this tube definitely gets rid of some of the wobbling and bunching up before your plastic gets to the hot end
-
Kim Williams
> 3 dayIf you are going to run a Bowden extruder then Capricorn is the only Tubing you should be running. And ensure you are using the correct fittings on both ends (hotted and extruder. This really takes the slop out of the filament feed. The other stock tubing is a bit loose and may cause some retraction issues. Capricorn is perfectly sized and actually helps reduce retraction issues.
-
Phoebe Cormier
> 3 dayPerfect fit and great quality.
Product description：
Capricorn Premium XS bowden Tubing is enhanced with a proprietary blend of high performance additives. It was developed specifically for 1.75mm filament with an extremely precise internal diameter. When printing flexible filaments in a bowden system, the inside diameter of bowden liner is one of the critical feature for the successful print.
|
|
|
|
|---|---|---|
|
Capricorn Premium XS Bowden imported Teflon tube, which is specially developed for 1.75mm consumables, has a very precise inner diameter. The shape and inner diameter of the height are consistent, the diameter is consistent and perfectly round, to ensure smooth lubrication of the wire, the inner diameter of 1.9mm is suitable for large and uniform filaments |
Made of PTFE resin imported from Japan, the most slippery substance known to mankind is slightly softer than ordinary PTFE, more flexible, heat-resistant, moisture-resistant, non-sticky on the surface, wear-resistant and corrosion-resistant.Makes the inner wall extremely smooth, and the extrusion efficiency is faster and better |
High-quality accessories, strong applicability Creative 3D selected imported Teflon tubes, high quality, low loss rate, suitable for all models of Creative 3D |
|
|
|
|
|
|
|---|---|---|---|---|---|
| Auto Bed Leveling Kit | Hotend Kit | Magnetic Build Surface | Glass Bed | Bowden PTFE Tubing | |
| Compatible Models | Ender 3, Ender 3 V2, Ender 3 Pro, Ender 3 Max, Ender 5 Pro, Ender 5, CR 10 | Ender 3, Ender 3 V2, Ender 3 Pro, Ender 3S | Ender 3, Ender 3 Pro, Ender 3 V2, Ender 5, Ender 5 Pro, Ender 3 S1, CR 20, CR 20 Pro | Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3S, Ender 3X, Ender-5, CR-20, CR-20 Pro | Ender-3 Series, Ender-5 Series, CR-10 Series |