Authentic Capricorn Bowden PTFE Tubing XS Series 1M for 1.75mm Filament with PTFE Teflon Tube Cutter, 2X PC4-M6 Extruder Fitting, 2X PC4-M10 Hotend Fitting for Ender 3 V2/3/3 Pro/CR-10 3D Printers
-
Nicholas Hoffman
> 3 dayI will never use another tubing for my 3D printer. Its just that much better.
-
Robert
> 3 dayReplaced the factory ptfe tube in my ender 3v2 the cutter works excellent and the replacement ends were like factory. Highly recommend. Ran this bushing using new tube as a test piece.
-
Prof. Darius Emmerich
> 3 daydid the job for 6 prints, and thats about it
-
Frank
> 3 dayWorks as advertised and was easy to install as well. A great and simple upgrade for increased realizability. Included tube cutter worked just fine and I still had tubing left over for replacement use down the line.
-
Dylan Crook
> 3 dayIt is better than the stock tubing on my ender 3 so no complaints.
-
JWSmythe
> 3 dayIf youre upgrading your printer, this is one of the first recommended changes. Replacing the white PTFE with this blue PTFE works a little better. The fresh fittings are in case your old ones start slipping. Ive had a couple start slipping over the years, so that is a thing. If you dont need them yet, add them to your parts box. Youll need them later.
-
David C Farcus
> 3 dayThis Bowden tube is a great upgrade that should be done to all Ender 3 printers. The cutter makes sure you have a flat end, and the PTFE tubing stands up to the temperatures better than the white default tube that ships with the Ender 3.
-
scott
Greater than one weekGood product, what I needed. Thanks
-
CJ Beck
Greater than one weekThe fittings work for one time use, the PTFE tube is not good for temperature usage but seems to be how it is being used. It gets really soft and causes issues during printing and any manufacturer using this as stock should think about how badly this stuff affects the users experience.
-
Muddy
> 3 dayIts new, its blue, it works as advertised. I dont believe this noticeably improved my prints, but for replacing my tubing that had gotten a little mangled it worked great. The releases work better than the originals as well. On an Ender 3 pro, there is enough new tube to replace the bowden tube twice. The included tuning cutter works well too.
Product description：
Capricorn Premium XS bowden Tubing is enhanced with a proprietary blend of high performance additives. It was developed specifically for 1.75mm filament with an extremely precise internal diameter. When printing flexible filaments in a bowden system, the inside diameter of bowden liner is one of the critical feature for the successful print.
|
|
|
|
|---|---|---|
|
Capricorn Premium XS Bowden imported Teflon tube, which is specially developed for 1.75mm consumables, has a very precise inner diameter. The shape and inner diameter of the height are consistent, the diameter is consistent and perfectly round, to ensure smooth lubrication of the wire, the inner diameter of 1.9mm is suitable for large and uniform filaments |
Made of PTFE resin imported from Japan, the most slippery substance known to mankind is slightly softer than ordinary PTFE, more flexible, heat-resistant, moisture-resistant, non-sticky on the surface, wear-resistant and corrosion-resistant.Makes the inner wall extremely smooth, and the extrusion efficiency is faster and better |
High-quality accessories, strong applicability Creative 3D selected imported Teflon tubes, high quality, low loss rate, suitable for all models of Creative 3D |
|
|
|
|
|
|
|---|---|---|---|---|---|
| Auto Bed Leveling Kit | Hotend Kit | Magnetic Build Surface | Glass Bed | Bowden PTFE Tubing | |
| Compatible Models | Ender 3, Ender 3 V2, Ender 3 Pro, Ender 3 Max, Ender 5 Pro, Ender 5, CR 10 | Ender 3, Ender 3 V2, Ender 3 Pro, Ender 3S | Ender 3, Ender 3 Pro, Ender 3 V2, Ender 5, Ender 5 Pro, Ender 3 S1, CR 20, CR 20 Pro | Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3S, Ender 3X, Ender-5, CR-20, CR-20 Pro | Ender-3 Series, Ender-5 Series, CR-10 Series |