Cooler Master NR200P MAX SFF Small Form Factor Mini-ITX Case, Custom 280mm AIO, 850W SFX Gold PSU, Triple-slot Vertical Mount GPU, PCIe Gen4 Riser, Tempered Glass or Vented Panel (NR200P-MCNN85-SL0)

This is case is structurally very solid. The front faceplate is built like a hood on a 60’s Buick. I was also able to fit a Power Color 6700XT Hellhound 3-fan card in this thing! Where it comes up short are things like the vertical GPU mount that they stamp out poorly and use in every case from that manufacturer. What happens is your GPU sits crooked and it looks funny. Also the magnets aren’t strong enough to hold the dust filters to the case so they fall off just sitting there. The metal used where holes are pre-tapped is thin and poor quality so it’s very easy to pull the threads out if you remove screws a couple times or aren’t careful. The next bit could be a real problem for some.. The riser cable which I understand to be Gen 4 capable does not function with MB bios set to “AUTO” or “Gen 4” so I had to pop a Gen 3 limited card in so that I could get into the bios and manually set the board to “Gen 3”. This would require most users to disassemble the pc to do. So I recommend testing the riser before assembly and setting the Pcie slot to “Gen 3” if needed or just slotting the card in and doing that regardless. Kind of disappointing spending all of this money on a new case MB, CPU & GPU and having that one part negate half the reason for spending all of the money, especially considering the cost of this case being quite high. Id also like to note I have a test bench that I tested this riser on as well and was unable to get it to work unless I manually set the bios to Gen 3 prior to using the riser. So that tells me it’s an issue with the riser. Would I recommend this case to a friend? Yeah, I think I would. It’s not terrible, it’s not great but it is fairly good overall. I would however recommend waiting for a sale.

Esta ventilado por 5 de sus 6 caras, por lo que el calor no es tanto problema, soporta ventiladores, disipadores y tarjetas gráficas de buen tamaño a pesar de ser tan compacto, puede aguantar fuentes ATX pero toca hacer concesiones si planeas ponerle un disco duro de 3.5 pulgadas, así si planeas ponerle una gpu de más de 2 slots de grueso toca poner ventiladores slim o en su defecto no colocarlos (depende del caso ni falta hace), a parte del tamaño compacto permite ponerlo en un escritorio pequeño

This is without a doubt the best approach to a case that can house full form factor, ATX size components without compromise. In current I am running a i9-9900k at 5.1 ghz, cooled by a nzxt x63 280 mm radiator. The temperatures of the CPU top out at about 70 C and the fans are dead silent. Mounted in the rear portion is a gigantic evga rtx 3080 ftw3 that takes up every bit of space spare a tiny bit in the front for airflow. The temperatures here are not amazing, but for a mini itx, 80-Ish C is quite acceptable. The fans do have to rev up and is a little noisy, but nothing to worry about, even with desktop speakers. You won’t be bothered unless you are a “everything must be dead silent “ enthusiast. I recommend getting a strip of poly foam to place between the case interior, bottom shelf, and rear of the graphics card to tone down gpu sag. It’s likely not an issue, but for me, I bought mini itx to enjoy moving it to LAN parties; the extra protection guarantees you won’t mess up your multi thousand dollar investment. Overall I find the clean, led-less build to be extremely satisfying, much nice to have extra desk space for the giant aw3418 ultra wide that sits next to it. The build IS tough, though. I sent a few hours putting it together iteratively as cable management was tricky. An after market braided cable set will likely make this easier, so if you don’t mind spending an extra 50 dollars, do it. Well done and bravo Cooler Master.

Its definitely bigger than my previous Dan Case A4 V4 but I like the ease of having better cooling capabilities and a layout optimal for Founder NVIDIA cards that blow through the heatsink.

This case is great. I have 3 of these in use and will likely purchase more. THE REBATE SYSTEM SUCKS. I received a $25 debit card for only one of them. The card will NOT activate on the provided website. Then they subtract $3.50 a month if it isnt used right away. It looks like Im out $75.

I have the white version of this case too. This Unit comes with some decent fans . Tons of options on this case. It is sturdy and the paint job is very good. Excellent case for an itx unit. Pretty much tooless as far as removing the panels . Oh and the instructions are straightforward ( A nice surprise) One small issue you may have is that your cables are visible if you chose the glass panel but not a deal breaker

This case though small in size will still fit a decent size cpu cooler and the case design is well ventilated.

This care is is just about perfect! Small, great build quality, and can fit full large gpus. You can tell they really mapped out every aspect of this case thorough. The only gripe I have is that there is no usb c port on the case but no big deal as my motherboard as one. I am actually surprised they even include an extra side panel if you want to switch between perforated or glass. I highly recommend this case to anyone looking to move to a smaller size for travel or extra room on your desk!

The ITX space is growing but still has limited options. This case checks most of the boxes for ITX build but my only concern is the custom AIO in the case. Just know that if you ever have an issue with your AIO you can not buy another brand or even a CoolerMaster off the shelf. This is a custom built AIO for the case so if it goes bye bye then you have to work directly with CM to get another. In my case I purchased 2 of these. The first one was fine but there must of been air bubbles caught in the pump because it would constantly crackle in that area. I disconnected all the fans and even the gpu and ensured the sound was from the pump. I purchased another and it seemed fine but once again after a day of use I started hearing the crackle. I contacted CM and they were great but they were going to have me send it in. I didnt want to deal with this down the road. There are many ITX cases that you can build with off the shelf parts so if something dies or goes wrong you can quickly get a replacement. Case is awesome but I wish the AIO wasnt custom. If they could design it where you could use any 280mm AIO that would be a 10/10.

This is hands down the most flexible and easy to use mini itx case for the beginners and the experts. It is such a joy to work in this case to fit your built. I have a 240aio and a full size gpu in there. Replaced all the fans with a low profile 120mm fans. You get plenty of cooling from all the vented panels with mesh all around the case. The case looks good and easy to transport or move anywhere. If you are somebody that just like small case and want to have a small footprint for a pc this is a bagger or even someone who want a pc and like to travel around. This is really such a great case for the price,