ELEGOO 3D Printer Resin LCD UV-Curing Resin 405nm Standard Photopolymer Resin for LCD 3D Printing Grey 1000g
-
Leonard Price
> 3 dayPrints really good, its just a little pricey for me.
-
cynthia
> 3 dayI usually use the water-soluble resin from them but they have been out for awhile now, I never have had any problem setting it in the sun and it never turned yellow. This yellowed in 2 min. outside and at 1 min. it started to yellow with a uv light . I need the white to be white not yellow!
-
Andrew Sloan
> 3 dayIve ordered a few times now. My first two bottles had seals underneath the cap. The most recent two did not and had content spill inside the packaging. Dont know what is up with the quality control lately. The product is fine, but with the seal being an unknown quantity at this point Id recommend getting something thats sealed until this problem is addressed.
-
Bot Medic
Greater than one weekThis stuff prints OK but this is the third bottle Ive received with a broken lid. The bottle is well packed in a sealed bag and bubble sleeve but the lids are cracking somewhere along the way and leaking. This one leaked badly before I had a chance to open it
-
Pierre Belanger
> 3 dayI ordered many times those resin bottles. My last order of 4 bottles came and the caps were broken and lost around 50% of the resin in the mess after filtering what was left in the bags in old empty bottles i kept. After i contacted Elegoo, they replaced 2 bottles for free. Ive ordered those many times, and it only happened on that shipment. Ive experienced another broken cap, this time it happened as i was shaking the bottle before a print and i noticed because i got splashed. Just be careful. I now always put a paper towel on top of the caps every time i shake them. Otherwise, it is a very good resin (albeit a tad bit smelly), and never experienced a failed print due to it.
-
Dino Jerde
> 3 dayI would not buy this again, smells worse than other resins, needs to be mixed more than other resins (after every print or you get failures), cold intolerant. and I got some on me (not their fault) and broke out hard.
-
L. Martin
> 3 dayWith the transparent resin, it isnt super clear with a noticeable yellow tint. I love how its not viscous at all, almost like water. It allows for easy use. Now with the 1000g white v1 it is insanely viscous. Almost like glue. Very annoying to mix with pigments. Otherwise high quality.
-
Roma Aufderhar MD
Greater than one weekFirst off....the resin itself prints well and seems durable. I would recommend for someone with excellent ventilation. For me, it is a not a good product. in a 1200ft climate controlled area with great air flow...the smell moved from my basement all the way up to my third floor. While in the basement, within 10 minutes my wife and myself both developed dry mouth and throat. Attempted to print with this stuff twice, weeks apart, with the same results. Good resin, terrible smell. I do highly recommend Elegoos Water washable resin, it doesnt smell nearly as bad, and no adverse health reactions ....yet.
-
spacemanspiff75
> 3 dayIve used about a dozen bottles of the Elegoo UV cure resin now, I bought it from amazon because it was the least expensive that was compatible with my Phrozen Mega 8k. While the prints are ok, this resin is BY FAR the smelliest resin Ive ever used through 3 different SLA UV cure resin printers and dozens and dozens of different resins. I have kept my printers in an office in my house and never had an issue with the smell permeating to the rest of the house. The first time I used this resin I fired up the printer and went out for a few hours, came back and the smell engulfed my entire house (2500 sq. feet). I had to open every single window and blast the AC to clear it out for hours. I moved the printer out to my garage workshop to get it further away and also into the ventilation system that I have for fumes , and it still works its way into the nearest rooms. Really, really strong resin odor. Ive read other reviews saying the resin isnt smelly, and all I can wonder is are they reviewing the same resin? Because no other resin Ive worked with even comes close. It works ok, but Im moving back to the more expensive resins that are less of a literal headache to work with.
-
Nunya
> 3 dayIt worked great, but while it was quite clear right after printing, after a couple of days on the window sill to cure in the sunlight, it turned rather orange. Still a nice product, but dont expect it to be whitish/clearish like in their pictures.
ELEGOO photopolymer resin is a type of polymer that changes its physical properties when introduced to light and it’s VOC free resin. In the case of 3D printing, these are typically liquid plastic resins that harden when exposed to a light source, such as a laser, a lamp, a projector or light-emitting diodes (LEDs) and most of these light sources irradiate ultraviolet (UV) light, which works perfectly with our photocuring resin.
Precautions:
- Shake well before use
- Recommended temperature 20°C - 25°C
- Always wear gloves and mask to avoid direct skin contact
- Keep away from children, dust and direct sunlight
- Wash with plenty of water immediately if you get direct skin contact with resin
ELEGOO Photopolymer Resin
Printing Setting:
- Bottom Exposure:60s
- Normal Exposure:8s
Resin Parameters:
- Hardness: 84 D; Shrinkage: 7.1 %
- Viscosity (25°C): 150-200 mPa.s
- Liquid Density: 1.100 g/cm³
- Solid Density: 1.195 g/cm³
- Flexure Strength: 59-70 Mpa
- Extension Strength: 36-53 Mpa
- Elongation at Break: 14.2
- Shelf Life: 2 year
|
|
|
|
|---|---|---|
Light Odor and Consistent SuccessPhotopolymer resin can be smelly in some cases. With the refined formula, ELEGOO resin has a very light odor and no pungent smell.Long-time printing can be demanding, but ELEGOO resin ensures consistent, high-quality prints. |
High precision and Low ShrinkageThe fantastic detail performance of the models printed with resin is just like artwork. With low volume shrinkage and linear shrinkage, ELEGOO resin ensures the print accuracy and make sure all the parts printed to fit in the right place. |
Safe and Secure Compact PackageLeak-proof bottle fully wrapped with a plastic bubble bag and compact designed package box make sure the resin stays in place where they belong. |
Wide Applications
ELEGOO photopolymer resin is compatible with the LCD 3D printers using the UV light source to cure models.
It has a wide range of application from board game miniatures to industrial parts and components.
You can also use it to print your 3D CAD design works and make it from an idea into reality.
The only limitation is your imagination. Print now and go with ELEGOO.
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| ELEGOO 8K Standard Resin | ELEGOO 8K Water Washable Resin | ELEGOO Standard Resin | ELEGOO Water Washable Resin | ELEGOO ABS-Like Resin | ELEGOO Plant-Based Resin | |
| Max. force（KGF） | 165.7±10% | 103.5±10% | 137.6±10% | 105.10±10% | 167.1±10% | 116.5±10% |
| Tensile strength（MPA） | 39.06±10% | 24.39±10% | 32.437±10% | 22.89±10% | 39.39±10% | 27.463±10% |
| Deformation at the point of maximum force（mm） | 5.32±10% | 5.66±10% | 9.863±10% | 8.45±10% | 6.41±10% | 12.338±10% |
| Yield point elongation(%) | 5.71±10% | 5.37±10% | 5.545±10% | 6.92±10% | 6.49±10% | 5.574±10% |
| Elongation at break（%） | 9.4±10% | 10±10% | 17.484±10% | 14.91±10% | 14±10% | 21.811±10% |
| Flexural strength (MPa) | 48.93±10% | 28.08±10% | 29.826±10% | 15.05±10% | 40.54±10% | 20.27±10% |
| Flexural modulus (MPa) | 1412.8±10% | 760.53±10% | 768.676±10% | 327.96±10% | 1089.62±10% | 531.271±10% |
| Impact strength（j/m） | 80±10% | 68±10% | 40.03±10% | 86.90±10% | 205±10% | 58±10% |
| Tensile modulus(MPa) | 538.4±10% | 327.7±10% | 424.97±10% | 232.05±10% | 538.9±10% | 328.562±10% |
| Reason to buy | Non-Brittle and Less Odor | Non-Brittle and Less Odor | Low Shrinkage | Water Washable, Easy to clean | High Toughness | Safe and no irriation |