ELEGOO 3D Printer Resin LCD UV-Curing Resin 405nm Standard Photopolymer Resin for LCD 3D Printing Grey 1000g
-
C. Watson
> 3 dayIve been using this stuff for a year now. printed small and large miniatures and building pieces. this has easily become my go to. good price and a good selection of colors.
-
Kindle Customer
> 3 daySo far not impress with this seller my husband bought this so when it arrived in the mail i didnt think anything so i sat it down until he got home so to our surpised it was leaking and to further inspection the bottle was open and didnt have a proper seal on it thankfully not much leaked out and hopefully he can get a few good prints out of that bottle
-
brandon
> 3 dayThis is absolutely an amazing resin! Little to no smell no issues with viscosity and packaging is always top-notch! Cure time is great! Still depends on the printer but Im at 2 seconds on Saturn S.
-
Anon
> 3 dayGood resin. Held sub mm detail well. Little bit difficult to break off print plate(didnt leave anything behind but stuck pretty hard), but otherwise great.
-
A.B.A
> 3 dayI am now using the water base . It’s not to do with Elegoo. It’s to do with white resin . I have black and gray . They work fine for me me . I do prefer filament. And my print has done 99% . I will do a review of this .
-
Jon Guzman
> 3 dayGreat resin for a great price.
-
Rik
> 3 dayI am printing on a Mars 2P. The time recommended by elegoo is 3 seconds. My first print failed, so I bumped it up to 4s. This print failed too. After doing exposure tests, I found the proper time to be between 6-7 seconds. This takes it down to RGB screen territory.
-
T. Spears
> 3 dayNot sure if I got a bad bottle, but the translucent turns yellow while its printing. The actual print quality is great, it was just a bit disappointing that its a dingy yellow rather than clear. Other than that its great stuff. A little smellier than others, but not bad by any means.
-
Eduardo
> 3 dayIm getting the best results with 2.1 seconds of exposure for each regular layer, Ive had no adhesion problems either, so far very happy with my prints.
-
Thomas
13-06-2025Ive recently got into 3D printing and was recommended this for my Elegoo Mars. Havent had any problems so far, as the resin comes packaged very well in a cushioned box and usually lasts me a month or so.
ELEGOO photopolymer resin is a type of polymer that changes its physical properties when introduced to light and it’s VOC free resin. In the case of 3D printing, these are typically liquid plastic resins that harden when exposed to a light source, such as a laser, a lamp, a projector or light-emitting diodes (LEDs) and most of these light sources irradiate ultraviolet (UV) light, which works perfectly with our photocuring resin.
Precautions:
- Shake well before use
- Recommended temperature 20°C - 25°C
- Always wear gloves and mask to avoid direct skin contact
- Keep away from children, dust and direct sunlight
- Wash with plenty of water immediately if you get direct skin contact with resin
ELEGOO Photopolymer Resin
Printing Setting:
- Bottom Exposure:60s
- Normal Exposure:8s
Resin Parameters:
- Hardness: 84 D; Shrinkage: 7.1 %
- Viscosity (25°C): 150-200 mPa.s
- Liquid Density: 1.100 g/cm³
- Solid Density: 1.195 g/cm³
- Flexure Strength: 59-70 Mpa
- Extension Strength: 36-53 Mpa
- Elongation at Break: 14.2
- Shelf Life: 2 year
|
|
|
|
|---|---|---|
Light Odor and Consistent SuccessPhotopolymer resin can be smelly in some cases. With the refined formula, ELEGOO resin has a very light odor and no pungent smell.Long-time printing can be demanding, but ELEGOO resin ensures consistent, high-quality prints. |
High precision and Low ShrinkageThe fantastic detail performance of the models printed with resin is just like artwork. With low volume shrinkage and linear shrinkage, ELEGOO resin ensures the print accuracy and make sure all the parts printed to fit in the right place. |
Safe and Secure Compact PackageLeak-proof bottle fully wrapped with a plastic bubble bag and compact designed package box make sure the resin stays in place where they belong. |
Wide Applications
ELEGOO photopolymer resin is compatible with the LCD 3D printers using the UV light source to cure models.
It has a wide range of application from board game miniatures to industrial parts and components.
You can also use it to print your 3D CAD design works and make it from an idea into reality.
The only limitation is your imagination. Print now and go with ELEGOO.
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| ELEGOO 8K Standard Resin | ELEGOO 8K Water Washable Resin | ELEGOO Standard Resin | ELEGOO Water Washable Resin | ELEGOO ABS-Like Resin | ELEGOO Plant-Based Resin | |
| Max. force（KGF） | 165.7±10% | 103.5±10% | 137.6±10% | 105.10±10% | 167.1±10% | 116.5±10% |
| Tensile strength（MPA） | 39.06±10% | 24.39±10% | 32.437±10% | 22.89±10% | 39.39±10% | 27.463±10% |
| Deformation at the point of maximum force（mm） | 5.32±10% | 5.66±10% | 9.863±10% | 8.45±10% | 6.41±10% | 12.338±10% |
| Yield point elongation(%) | 5.71±10% | 5.37±10% | 5.545±10% | 6.92±10% | 6.49±10% | 5.574±10% |
| Elongation at break（%） | 9.4±10% | 10±10% | 17.484±10% | 14.91±10% | 14±10% | 21.811±10% |
| Flexural strength (MPa) | 48.93±10% | 28.08±10% | 29.826±10% | 15.05±10% | 40.54±10% | 20.27±10% |
| Flexural modulus (MPa) | 1412.8±10% | 760.53±10% | 768.676±10% | 327.96±10% | 1089.62±10% | 531.271±10% |
| Impact strength（j/m） | 80±10% | 68±10% | 40.03±10% | 86.90±10% | 205±10% | 58±10% |
| Tensile modulus(MPa) | 538.4±10% | 327.7±10% | 424.97±10% | 232.05±10% | 538.9±10% | 328.562±10% |
| Reason to buy | Non-Brittle and Less Odor | Non-Brittle and Less Odor | Low Shrinkage | Water Washable, Easy to clean | High Toughness | Safe and no irriation |