Rockford Fosgate P500X1BD Punch 500 Watt Class-bd Mono Amplifier
-
Stephen Coffee
> 3 dayExcellent amp for the $. This is the first RF amp i have bought in probably 15 years, and Im glad I did.
-
ocie wright
> 3 dayI between dealing with Rockford fosgate Amps n subs for years now, I need to be sponsored by them
-
abrego
Greater than one weekI know people give out birth certificate of watts and mine came out to 789 in one ohm. Mine is wired at two ohms and delivers 511. I highly recommend this amp.
-
ljmitchell
> 3 dayHad a Boss riot 1100 in my crew cab gmc driving a single 12 shallow that I pulled from my old truck to get a little more thump. When I had the riot installed I was happy and thought it didnt sound bad, it went into protection mode a lot if I bumped it too hard. And one day I burned my hand on it so I stated searching for a 1 ohm amp asap. Well I installed this one and the paper said it passed with like 740-ish watts. Well I installed this with a good 4 guage wiring kit and all I can say is WOW! completely blows the riot away in every category! Which you would expect but dang, it just sounds so clean and crisp. I was thinking about buying 2 12s before but now it hits really good and Im completely happy! It hits clean all the way through and tuning it was very easy with the given instructions. It also looks clean with the hidden wire boxed area. Very happy, even though its more than what I wanted to pay since Im about to head to college but it is well worth it knowing this one will not catch my truck on fire!
-
Edmund Jerde
Greater than one weekI like it a lot and would buy again had no problems
-
aaroncarr23
> 3 dayThis amp is awesome! I replace a RF P300 and I am happy I did.
-
John Hardy
> 3 dayBirth sheet has the amp rated at 790 watts @ 1 ohm. AWESOME.
-
Yancy
Greater than one weekAmazing sound, great amp
-
David
> 3 dayPowering 2 - DVC P|3s and they sound great. I spoke to a Rockford representative and he said this was more than enough to power my setup.
-
Darion Johnson
> 3 dayAlways been a Punch fan!! I have the Rockford P500X1bd pushing a 10in 2ohm Kicker CVT. The sub is in a MTX Bass Slammer enclosure for a 2005 Chevy Tahoe. The sound is clean and there is plenty of power. The birthsheet that came with my amp says 770 watts @ 1ohm. Very easy to setup and get the proper gain for your particular system. Would definitely buy again and recommend.
Power & Bass On Demand!
P500X1BD
The Punch P500X1bd is a mono amplifier capable of producing 500 Watts into a 1-Ohm load.
Due to its dedicated low frequency response, this amplifier is optimized for mid-bass speakers or subwoofers only.
With its super efficient Class-BD circuit topology, the P500X1bd will drop some serious BASS! The stealth top mounted control panel not only provides a sleek finished look to the amp, but it also protects the vital controls.
Our custom heat sink design uses high aluminum mass where it is needed most to maximize heat transfer from the output MOSFETS to the surrounding air, keeping the circuitry cool even under high power and output demand.
- Punch 500-Watt Full-Range Mono Amplifier
- Rated Power: 150 Watts x 1 @ 4-Ohm OR 300 Watts x 1 @ 2-Ohm OR 500 Watts x 1 @ 1-Ohm
- 12dB/octave Butterworth crossover
- Power Wire Gauge: 4 AWG
- Speaker Wire Gauge: 8 AWG to 18 AWG
- Optional Punch Level Control Ready (PLC2 sold separately)
- Recommended Fuse (not included): 80 A
- Dimensions (H x W x D): 2.38" x 7.76" x 11.03"
C.L.E.A.N. Set-Up
C.L.E.A.N. (Calibrated Level Eliminates Audible Noise) is our patented circuit with in/out clip LEDs to help match a source to amp and optimize output
Punch EQ
Delivers more bass where you want it most by allowing up to 18dB of boost adjustment at 45Hz
Multi-Signal Inputs
The RCA inputs of this amp can accept both Hi or Low level audio signals without the need of a signal converter
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| P1000X1bd | P500X1BD | P300X1 | P1000X2 | P500X2 | P300X2 | |
| Number of Channels | 1 | 1 | 1 | 2 | 2 | 2 |
| Total Power (RMS) | 1000 | 500 | 300 | 1000 | 500 | 300 |
| Bridgeable | No | No | No | Yes | Yes | Yes |
| Circuit Topology Class | Class BD | Class BD | Class A/B | Class A/B | Class A/B | Class A/B |
| Cooling | Convection | Convection | Convection | Convection | Convection | Convection |
| Recommended Fuse (not included) | 140 A | 80 A | 50 A | 140 A | 80 A | 50 A |
| Dimensions (H x W x D) | 2.38" x 7.76" x 13.28" | 2.38" x 7.76" x 11.03" | 2.38" x 7.76" x 9.86" | 2.38" x 7.76" x 15.03" | 2.38" x 7.76" x 13.28" | 2.38" x 7.76" x 9.86" |
| Rated Power | 300 Watts x 1 @ 4-Ohm | 150 Watts x 1 @ 4-Ohm | 200 Watts x 1 @ 4-Ohm | 300 Watts x 2 @ 4-Ohm | 150 Watts x 2 @ 4-Ohm | 100 Watts x 2 @ 4-Ohm |
| (or) | 500 Watts x 1 @ 2-Ohm | 300 Watts x 1 @ 2-Ohm | 300 Watts x 1 @ 2-Ohm | 500 Watts x 2 @ 2-Ohm | 250 Watts x 2 @ 2-Ohm | 150 Watts x 2 @ 2-Ohm |
| (or) | 1000 Watts x 1 @ 1-Ohm | 500 Watts x 1 @ 1-Ohm | 1000 Watts x 1 @ 4-Ohm Bridged | 500 Watts x 1 @ 4-Ohm Bridged | 300 Watts x 1 @ 4-Ohm Bridged |
|
|
|
|
|---|---|---|---|
| P600X4 | P400X4 | P1000X5 | |
| Number of Channels | 4 | 4 | 5 |
| Total Power (RMS) | 600 | 400 | 1000 |
| Bridgeable | Yes | Yes | Yes (front/rear channels) |
| Circuit Topology Class | Class A/B | Class A/B | Class A/B + Class BD (Sub) |
| Cooling | Convection | Convection | Convection |
| Recommended Fuse (not included) | 100 A | 60 A | 150 A |
| Dimensions (H x W x D) | 2.38" x 7.76" x 13.28" | 2.38" x 7.76" x 11.03" | 2.38" x 7.76" x 15.03" |
| Rated Power | 75 Watts x 4 @ 4-Ohm | 50 Watts x 4 @ 4-Ohm | 75 Watts x 4 + 150 Watts x 1 @ 4-Ohm |
| (or) | 150 Watts x 4 @ 2-Ohm | 100 Watts x 4 @ 2-Ohm | 125 Watts x 4 + 300 Watts x 1 @ 2-Ohm |
| (or) | 300 Watts x 2 @ 4-Ohm Bridged | 200 Watts x 2 @ 4-Ohm Bridged | N/A + 500 Watts @ 1-Ohm |