Tool Daily Pressure Washer Sandblasting Kit, Wet Sand Blaster Attachment, 5000 PSI, 1/4 Inch Quick Disconnect
-
famedleopard
> 3 dayWorked very well but the hose needs to be longer.
-
Ohio Buyer
Greater than one weekWorks pretty well. Be prepared for a mess. But I used it to blast and clean my 60” mower deck inside and out. Keep your sand dry and this thing will suck it out of the bucket just fine. I recommend
-
David A Baker
> 3 day2.5GPM, 2900PSI Pressure Washer with 3.0 nozzle. Blasted an entire car frame that was rusting since 35. Took (17) 50lb bags of media to complete, and around 8 hours of blasting. Used Black Diamond Fine Coal Slag from Tractor Supply. Some very important notes. 1) the supplied hose must be replaced immediately. I blasted half of the frame with it, and the internal ribs and large diameter of tubing cause the media to be pulled through the nozzle in waves. I replaced it with a 3/8 fuel line, and immediately had far better success and consistent blasting. Note that the hard lines accept 1/2 hose. I forced the 3/8 line on, and felt the smaller diameter produced better suction. 2) if you get any water in the hose, swap for another dry hose. I tried blowing the water out with air, and just could not get it completely dry. Kept clogging. 3) this is a very slow and messy process. But for the price it is worth it. 4) metal will flash rust but is easily resolved with a wire wheel.
-
nick brown
Greater than one weekPleasantly surprised. Figured Id buy it and if it didnt work, just return it. It works and really well.
-
Robert L. Crane
> 3 dayToo good to be true?? Yep!!! You cant get a quality sand blaster for $30. I tried but it simply does not work. Product failed from the very firsr use. Could not get it to suck up media. Followed all the instructions exactly.
-
David W. Hill
> 3 dayLooks solid. Can’t wait to try it out
-
Jeff
> 3 dayThis is a well-made tool for the money. I have no complaints about the quality of construction, the design, or functionality. The ONLY reason I didnt give it five stars is that it wasnt the best for my application, which was removing paint from the steel frame of an exercise bike Im restoring. It uses double (approx) the media of a dry blaster, and the bare metal rusts almost immediately! If I were working on a non-metallic project, and if it were a little more efficient with the blast media, Id have given 5-stars.
Tool Daily: The Great Brand for Pressure Washer Accessory
Tool Daily are committed to developing more efficient and safer pressure washer accessory, helping people reducing the tiredness of spraying and cleaning in the garden. We are known for amazing pressure washer accessory, such as nozzle, wand, gun, coupler, foam cannon. We do everything in our power to ensure customer’s full satisfaction with the product quality and service.
SPECIFICATION
Replacment Nozzles are available. Product "Tool Daily Pressure Washer Sandblasting Nozzle, Replacement Wet Sand blaster Attachment, 5000 PSI, 2-Pack".
- 1. Minimum Flow Rate: 3 GPM
- 2. Minimum Pressure: 3000 PSI.
- 3. sand into water system.
- 4. Max Working Pressure is up to 5000 PSI.
- 5. 1/4 Inch Quick Connect.
- 6. Temperature is up to 140°F/60℃.
- 7. Orifice 3.5.
Application
Pressure washer sand blaster kit works for abrasive cleaning. Great for removing rust, graffiti, paint, baked on grease.
How to Set Up
1. Connect 1/4’’ quick connect plug (B) to pressure washer trigger gun or wand.
2. Insert sand wand (C) into media (dry silica sand, baking soda or washed and dried river sand). Please make sure the sand is dry, or it will not work.
3. Turn on the pressure washer. Unlock the trigger gun, then water and sand will come out from permanent nozzle (A). Please make sure the part D is above permanent nozzle (A). If the part D is underneath permanent nozzle (A) as the image shown, the water will go into the hose of sand, wet the sand and then sand will not be sucked up.
4. After work, please dry the cleaned goods as soon as possible, otherwise they will rust again the next day.
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| Pressure Washer Sandblasting Kit, Sand blaster Attachment | Pressure Washer Sandblasting Kit | Dual-Function Undercarriage Cleaner | Replacement Sandblasting Nozzle 5000 PSI | Pressure Washer Extension Wand | High Pressure Washer Gun, with Replacement Wand Extension | |
| Specification | Orifice 2.5 | Orifice 3.5 | 1/4” Quick Connect | 5000 PSI | 1/4 Inch Quick Connect | M22 Fitting |