Tool Daily Pressure Washer Sandblasting Kit, Wet Sand Blaster Attachment, 5000 PSI, 1/4 Inch Quick Disconnect

Bought a 3.0 and a 3.5. Quick connect fittings are not properly machined. Doesnt allow fitting to completely close. The 3.5 will fully seat with lots of force, but the 3.0 is Unusable! Once connected it works pretty well. Better than any other similar blast nozzle for washers. It consumes massive amounts of media though. I restricted the air siphon tube a bit to help with media consumption. If the fittings worked properly, it would be a five star review.

Anyone having trouble with this is probably not doing it right. Used it with medium contractors sand from Home adroit and a 3300 PSI pressure washer. Couldn’t have been easier. Went through about 50 lb of sand on this project. Could have kept going but I got what I wanted out of it. Dry the metal immediately after. I used compressed air to dry this piece. Then paint.

Love the quality

It is pretty sturdy with brass covering the ceramic end piece, will see how it works. Have used it a few times now... very slow but did the job of getting rust off the ancient window screens for painting

I didnt this would take paint off as easy as it does. My pressure washer is only 3000psi and 2.5 gallons a min, if I had a bigger one it would be faster.

3200 psi 2.5gpm worked perfect with a cheap bag of play sand. To keep it from clogging make sure you keep the hose that is in the sand facing upward all the time. If you don’t water will get in and cause it to stop working.

Tried using the harbor freight 100lb media blaster with an air compressor. That was a fail; whatever you blast will ricochet and blast the crap out of you and get the sand and debris all over everything. Great exfoliation for your arms and everything not covered, but excessive amounts of sand in your butt crack. With this pressure washer attachment everything stays relatively clean and the dust/ sand stays knocked down. I was able to use this with sunglasses, shorts, and a t shirt while getting a better end result. The only thing thats kind of a bummer is whatever metal you blast is going to flash rust. The best rust converter I used was Eastwoods rust encapsulater. Pair these two together and youll be golden.

Sand will stop flowing constant prep needed helper is helpful

It works great for the money, regular sandblasting definitely works better but if you don’t have a compressor at home like me then this is the way to go, I used a 2500psi 5GPM pressure washer and a 2800 psi 2.4 gpm, the higher GPM unit worked best, I did go through a lot of material fast, I used coal slag first worked great and then I used play sand from Lowe’s which worked better only thing you need to do if you use play sand is put a tarp out and pour the sand thinly and let it sit in sun or a hot shop to dry out and rake it to flip the damp sand,if you don’t dry the play sand the blaster will not work at all, I used about 150lbs to do 4 brake calipers and the brackets but I probably need another 50lbs to complete them, if you have a good pressure washer then I would definitely recommend buying this.

Product looks good havent had a chance tp use it but for the cost os 20 bucks and being a simple product im sure its fine