Polycarbonate Clear Plastic Sheet 12 X 18 X 0.0625 (1/16) Exact, EasyRuler Film, Shatter Resistant, Easier to Cut, Bend, Mold Than Plexiglass. VEX Robot, Hobby, DIY, Industrial. Glass Replacement

(0 Reviews)

Price
$9.95

Quantity
(10000 available )

Total Price
Share
98 Ratings
80
14
2
2
0
Reviews
  • Miguelangel M.

    > 3 day

    I used these to cover the top of my aquarium. They did the job.

  • Sylvester O'Keefe

    > 3 day

    I loved the flexibility of the polycarbonate. It is not brittle and bends easily. I was using it for an art project and it was a better choice than rigid acrylic. However, it is difficult to cut to size with Exacto knife blades. It is easier if you are cutting a large piece. You can score with the blades and snap it apart with weight on one side. However, I just needed to trim less than half an inch the 18-inch length of the piece. Very difficult to score and snap. So, I would recommend a band saw to cut small pieces.

  • Kathy S.

    > 3 day

    So far I havent any dislikes. I use the pens on a sheet of Polycarbonate plastic. I place the plastic sheet over a crochet pattern which I use sticky dots to hold the pattern onto the plastic sheet, I then use the markers to mark the spot on the plastic where I left off on the pattern. No problem to pick up where I left off on my project and it keeps my paper pattern clean and neat.

  • ulrik

    > 3 day

    I needed a glass plate I could have cut to size to fit in my tray but was unable to find any glass that fit the measurements that I could get in a timely fashion or at a manageable price. it was 2 inches too long on the long end but I had no issues getting it separated by making two cuts on either site, bending the sheet and then cutting it again it scratched fairly easily from my scraper due to it being a plastic but as long as I was careful it held up for the whole semester and served its purpose well. If youre in a pinch and need a glass surface for keeping and mixing your oil paint as I did, this should last you about half a year or so, though if you can get it, real glass is preferable for that purpose.

  • None

    > 3 day

    You just peel off the sheeting on both sides & use these as you want. We are using these for a bookcase-- the sheets cover/are supported by vertical slats. The sheets keep books from falling through the slats but are barely noticed & the pretty wood slats look great.

  • Sandra Wright

    > 3 day

    This has been a life saver for me at my school this year being able to put a small hole and tie rope around to make personal bubbles

  • L. Timar

    Greater than one week

    Product arrived as described. Easy to cut to size and works exactly as planned.

  • Ms. Corene Gleichner

    > 3 day

    Cuts easy ... yah not super thick but works fine to build small aquarium tops ...

  • OG_Engineer

    Greater than one week

    Nice PC sheet. Using it to cover my aquarium to reduce evaporation rate. Works well, holds up a small LED light panel.

  • Daniel

    > 3 day

    Used them to make a fish tank cover cut them easily after passing 5 to 8 times with a pcoket knife then snaping them with nice clean edges

Polycarbonate is a superior clear plastic sheet compared to Plexiglass/Acrylic
Sheets can easily be cut, milled, and drilled with any standard tools (hacksaw, jigsaw, snips for thin sheets, standard drill bit, etc.) without the cracking or fracturing you would find in Plexiglass. Additionally, Polycarbonate can be bent neatly. Thin sheets can be bent cold with sheet metal techniques, while thicker ones are easy to shape with the help of a heat gun. It is also perfect for thermoforming or vacuum forming. This makes Polycarb perfect for both DIY and professional projects around the home, shop, or for manufacturing.

Shatter Resistant & Strong
Polycarbonate has great mechanical properties, making it often considered as a safer option than glass sheets or acrylic sheets. Tensile Stress: 63 MPa. Flexural Stress: 90 MPa. Rockwell Hardness, R: 120

High Optical Clarity
Light transmission of 88-90%, tested at 2.54mm thickness per ASTM D1003

Electrical Resistivity
Volume Resistivity: > 1.0E15 Ohm-cm

Protective Film on BOTH SIDES
This product is shipped with a thin protective film on both sides. Please peel this off to expose the clear sheet. You can mark onto this film while working with the material, then remove it to expose a pristine surface.

Related products

Shop
( 610 Reviews )
Top Selling Products