Redragon K556 RGB LED Backlit Wired Mechanical Gaming Keyboard, 104 Keys Hot-Swap Mechanical Keyboard w/Aluminum Base, Upgraded Socket and Noise Absorbing Foams, Quiet Linear Red Switch

If you want to get into a mechanical on the discount, this could be a good choice. Knock off cherry MX brown hall effect switches. Lots of LED, not full array-full zone, but ok. The unit performs well and is largely quiet except for the over travel by the switches. If you want a mechanical for work or games, you could do far worse

We use these for gaming. Great mechanical feedback and excellent quality for the price! No problems with keys or need to replace any so far. This brand is a great value. There are audible clicks when you use this keyboard, so if that annoys you (or anyone around you) you may not want to not opt to buy any mechanical keyboard. That said, I don’t think it’s that loud and I actually enjoy hearing the clicky sounds as I type. I’d guess that these would make anyone a better typist (and maybe gamer!) My kids are now mechanical keyboard converts. After moving off of a mushy membrane keyboard, they can’t believe the difference. :)

Its been just a good keyboard. Its also unexpectedly heavy, so be ready for that. Also get a wrist pad if you dont float your wrists when typing. The software is primitive and the RGB spectrum isnt great. The color you select on screen often doesnt match what shows up on the keyboard unless you are close to a standard color, example, white is light purple, and the lighter you go on any color slowly turns into light purple. Has a twang that sounds like a spring being flicked in a metal box if you press the keys with normal typing force, so I constantly hear it. I hear people say its because the switches are seated in a metal frame, but I understand a common theme among higher quality mechanical keyboards is they are mostly metal, so Ill chalk this experience up to low build quality. Would be interesting to hear the switches in a plastic frame. They are also starting to develop a slight squeak. I havent tried lubing or isolation rings so not sure if that would help. I dont think the actuation force feels uniform across all keys. These brown switches have a barely noticeable ridge when pressed, my opinion is that they are just alright in terms of mechanical feel. It comes with other samples of switches, the blacks take more force but dont have a noticeable ridge when pressed, the reds just feel light and mushy, and the blue have a nice click that sounds similar to a mouse click but add in the twang and squeak issue I mentioned earlier and I dont think I could handle that... The caps lock indicator light will sometimes switch indication. Meaning when you press the caps lock key and the light turns on, youll be typing lowercase. It switches back on its own. I have no idea whats going on with that. This is my first mechanical keyboard, so I didnt want to spend a lot. You get what you pay for so thats why I rated 4 stars instead of 3, because a lot of this doesnt necessarily mean the keyboard is junky it just means it was constructed as a cheap mechanical keyboard. I went from low profile membrane to this and it definitely required a learning curve, but regardless of all of this I dont think Ill go back to membrane. In the future Ill just get something higher quality that has switches with more actuation force, less travel, and an ever so slight click if something like that exists.

Highly recommend for a gaming experience. Be warned though, it’s louder than most other gaming keyboards.

I really like this keyboard, I pressed it about 2 years ago and it’s worked fine until recently. About 6 month to a year ago the F key stopped registering all the time. It was find with me because I used that key a lot. About 2 months ago the left shift key and D key started doing the same thing. Now the D key has stopped working. I generally love this key board and thinking of buying another. It was definitely worth the price.

I bought this keyboard after seeing a few reviewers talk about how much they liked the all metal body. Everything I saw online seemed to agree that the keyboard was really good, but could have been better, specifically complaining about the hardwired cable and tight hotswap terminals that limit compatibility. But when the keyboard arrived, I didnt actually get what the product page described, it turns out theyve send me an upgraded version. Its the same keyboard, but theyve replaced the hardwired cable with a detachable USB C cable, and the hotswap terminals have been upgraded to more expensive plugs with wider switch compatibility. The old terminals only supported Outemu switches because theyre so thin, but Ive tested thicker Gateron switches and they fit perfectly. The LED is on the underside of the board too, so you can even use ones without the LED cutout window and they fit fine (Although they obviously block the light from the LED). Overall I am very pleased with the keyboard, and the upgrades theyve made to it have me wondering why they havent updated the store page to reflect them. I guess I cant say for sure that I was supposed to get this version but I didnt do anything special, I just ordered the bundle with the wrist rest. The brown switches feel great, so ironically I probably wont even use the upgraded hotswap sockets, but its nice to have options anyway. Theres really no issues I can bring up about this keyboard, and over the last week Ive been trying a ton of them to find the right one for me. Ive returned a K70 RGB Pro, a Strafe RGB MK.2, EVGA Z20, Razer Huntsman Elite, Logitech G815, Steelseries Apex 7; and this keyboard is both my favorite and the cheapest of the bunch. If they made a version with media keys over the numpad and magnets for the wrist rest Id be all over it. The only nitpick I can even come up with is that the seams where the metal edges meet are a little crooked and dont sit completely flush, but frankly I dont really care.

Really like this keyboard. Brown switches feel responsive.

This is an amazing keyboard for the price. The one I received only came with extra red keys, but I dont mind that at all. I did have some issues getting the right software for the keyboard, but some emails with support fixed it in just a short time. Works great for gaming and typing. Ton of fun with all the different modes, especially with the one that causes ripples when you type. If you can type fast, its like chaos at your fingertips.

Ngl this is my first mechanical keyboard so I’m no expert but I still really like it. I type a lot both for fun and for school, I haven’t had an issue with the keys or the board itself. It’s heavy because of the metal base but I’m not planning on carrying it around with me or travelling with it. I like the heaviness because it doesn’t feel like it’s going to break. Recommend

I have been using this keyboard since 2017, so I think its fitting that I leave a review for it. This review is for the original listing with standard OTEMU Brown switches. I am aware of the fact that they now come with OTEMU BOX Browns, but the experience is basically identical. Lets go over the basic parameters first: Unboxing Experience: So the box itself is alright, it serves its purpose of holding the keyboard itself. In the box, it comes with the keyboard itself, a keycap puller, a keyswitch puller, and ten extra key switches in a different variant. Since my keyboard used gateron browns, they gave me gateron blues to try out. Box itself doesn’t come with very much, other than these items. The most useful to me were the extra switches in the box. Both the keycap and key switch puller broke after a few uses. the key switch puller in particular broke the clips on some of my key switches. Serviceable, but I would rather buy my own toll in this case. Looks: This keyboard is so damn sturdy. Up until that point, I was used to cheap plastic keyboards. So the mostly metal construction is excellent! I couldn’t feel very much flexing while typing. The keycaps are okay. they are double shot, so they won’t wear out as much as ABS. The font itself is much more of the “gamer” aesthetic. I used them for about two years before replacing them for better looking keycaps. the lighting itself is good, though controls are basic. Changing color profiles without software is a nice touch, though some savvy hackers have found a way to change colors without official software. The all black design makes it fit in with most builds, though it does stand out on a lighter colored desk. the only real downside is the the secondary function keys have their labels printed on as opposed to part of the injection mold. So eventually those legends will wear away, which I have somewhat done in those two years of using the keyboard. There is a Small Red Dragon Logo above the Arrow keys and a sticker on the back detailing the keyboard information. Its very minimal, and actually decent all things considered. Feel: This keyboard won’t win any rewards for being different. The keys themselves are fine for typing, better than membrane keyboards in all regards. There is rattle and wobble on both the key switches and stabilizers, but they are not deal-breakers at this price point. The metal reinforced backplate and metal frontplate do a good job of keeping the board stable while typing, though there is no padding behind the keyboard so it does sound a bit hollow. No lube anywhere, so scratching noises will be common. Features: So this board has hotswap capabilities, but only for OTEMU Switches. Do not try to use Gateron, Cherry, Kalih, or other brands. The pins wont fit the post mounts. This is good for interoperability between different OTEMU brand switches, but you have to desolder the pins if you want anything else. This WAS a selling point back in 2017, however they recently removed it since its only really applicable to OTEMU brand switches. Again, the RGB is a nice touch, including the preset profiles. The design is held in by multiple screws, which makes dis-assembly for modding a breeze. The USB cable itself is connected to the board using a 5-pin header, so if you break the cable, you can easily replace it using a soldering iron. The keycaps are OEM profile, so you can buy an aftermarket set and put them on the keyboard no problem. the stabilizers are plate mounted, so you can replace them with cherry OEMs once they break. Honestly, if you want to use this board as a cheap base for your next keyboard, then this might be for you. Even still, this is a surprisingly reparable keyboard. Downsides: Honestly, I only have two downside for this board. That being a non-removable USB cable. If they had just added a removable port, either USB-Micro B or USB Type-C, it would make this keyboard so much better. Like, they could’ve done it so easily too. The piece that holds the wire in place is not a through hole permanently attached to the chassis, its a rubber piece that holds the cable in place. there is enough clearance to put in a female USB Type C Header in there. The other reason is the OTEMU-only hotswap sockets. I know that kalih brand switches (or similar) are more expensive to implement, but this would allow you to use ANY switch possible. Right now, you can only use OTEMU switches. Yes, they have good variants such as the reds and blacks, but it sucks that its only these brand switches and nothing else. There is also the minor downside of some of the screws losing their paint over time, though, you won’t be able to see them from the top of the keyboard. Verdict: Overall, a good keyboard for the time. Back in 2017, when there were not very many cheap mechanical keyboards on the market, this would have been the no-brainer choice. But nowadays, there is a lot of competition in this market. I would hope that Redragon would be keen to revise this board, with the possibility of a removable cable. Its still a good keyboard, but its becoming harder to stand out with so many competitors.