Smart Dimmer Switch Single Pole, Meross Smart 2.4GHz WiFi Light Switch for Dimmable LED, Compatible with Alexa Google Assistant and SmartThings, Neutral Wire Required, Remote Control Schedule,1 Pack

I put these in my kitchen on six LED can lights and it works great. I also install one in each bedroom for the kids and myself. They are easy to install with instruction right on the app. The switches work really well with Google Home. I can tell Google what level to put the lights to and it instantly does it. You can even program times for the lights to turn on and off. For the kids rooms I programmed the lights to turn off at 10 pm to let them know its time for bed (if by chance they hadnt turned them off by then). I put these and the single-pole switches all throughout the house now I just need to install the three-way switches to finish up all the light.

I bought these smart switches to control lights in my home. Most of the smart switches went to outdoor lights as it was the best option for me to have the best control of lights I needed to operated remotely. The install is super easy and they connect to my wifi with no issues. Every one that I have installed needed a firmware update immediately after installing but they were operational in minutes. Pairing with Alexa app was also easy and I was turing on and off my lights using my echo dot in minutes after install. They are a little bulky compared to normal switches so make sure you push the wires and wire nuts to the far back of the box you are installing them in or you wont fit them in on the first shot evenly. They do need to be grounded and I had to ground them to a metal electrical box in one installation as I have some older wiring in my home along with some newer but the switches work great and wifi signal is not an issue in plastic or metal boxes. I also love that when the lights are off you see a little red light in the body of the switch. You can instantly tell if the lights are on or off and if it is dark in the room you can easily find the switches. They also make a satisfying click when depressed and I havent had a single issue with any of the switches that I’ve got.

The first switch set I received ended up being defective. Meross was very responsive and after a couple of emails, I promptly had a replacement, which worked as it should. I have several of the Meross smart switches and this is my first one that is a dimmer. I love all of them and will likely purchase more as I continue to make the switch to a smart home.

Needed a 3 Way Smart Switch with Apple HomeKit compatibility. The Meross 3-way smart switch worked perfectly for my situation. When our family goes away on vacation, we leave lights on in the home for security purposes. The best lights to leave on are our hallway lights with 3-way light switches. Until now, I had no way to control them when away from home (or on a schedule). The Meross 3 Way Switch has solved this problem: I can easily setup a lighting on/off schedule in the app. A great feature is the ability to change the schedule from my smartphone - its very convenient. Love the 3 Way Smart Switch product as it gives me peace of mind when I am away from home. Even if I forget to leave a light on, I can easily turn it on remotely. Construction & quality seem great as the Meross Smart Switches have been very reliable so far. I highly recommend these switches if you are looking for a convenient reliable smart lighting solution.

I was pleasantly surprised that this was indeed a kit to re-wire and control both ends of a 3 way switch setup! My biggest complaint has been mis-matching switches on either end and this resolves that and both switches act as one. Actually works better than typical mechanical 3 way switches where one switch will end up opposite of the other. You toggle either switch and they communicate and will always be in the same state. And with the added smart functionality you only add one switch since they act as a single unit! Meross has been bringing a lot of great new smart products and this one really sets the bar high. As far as installation goes they have improved the wire leads by soldering them, no more need to twist the wires prior to putting on the wire nuts. Included instructions were easy to understand and within 10 minutes I had both switches replaced and full functional. I set these up to control my kitchen LED lighting which I wasn’t even sure were dim-able but after testing they work perfectly! Each level of brightness is a clear change and absolutely no light pulsing. As well the switch will remember the last brightness level after being toggled off and back on. I set these up with HomeKit as well they popped right into my Alexa app since I already had the Meross skill setup, so no user intervention there. I have been using them for about a week now and have 0 issues. I would highly recommend these to anyone wanting to setup 3 way smart switches. Now I hope they release regular non-dimmable 3 way switch kits.

The Meross Smart Dimmer Light Switch does exactly what you think it it: a smart dimmer light switch and nothing more. It is easy to setup (requires neutral wire), configure in the app, and to use. There is trimming on it for your lights that you are using as well. We used this in our bathroom with an LED bulb and an ultra thin LED recessed can light. Previously the HS200 from TPLINK caused flickering, but we did not see any on this switch which did impress us. Smart connectivity has worked perfectly every time with google home and IFTTT. Now onto the question, would I put these throughout our entire house? Probably not because in general, I dont think it looks nice in comparison to TPLINK or Lutron Caseta dimmers. It looks relatively cheap in my opinion especially with the LEDs on the front panel bleeding into the other areas. It also bugs me that the power button is on the bottom instead of the top. As an electrical engineer, I also am hesitant to install something that is not UL certified. It does have ETL certification, but in America, it is UL certification. In conclusion, its a good product that works reliably. It is a good value and if you are on a budget, these will work for you. Note: We were given one free as a review model.

Most of my house light switches are smart except for the stairs light switch which is controlled by two switches. When the Meross 3-way Smart Dimmer Switch with Apple Home Kit became available I decided to get it. The install process is advertised within 15 minutes, and it is a simple as re-connecting wires, but since Im not an expert in electrical work, it took me about an hour with going to the electrical box, going up and down stairs, etc. Its not that hard and the app has an instructional video which I highly recommend to use as stated in the paper instructions included. Im very pleased with Meross. A committed customer since my first purchase, Meross Smart Wi-Fi Garage Door Opener and continued customer with smart single pole light switches and smart plugs. The dimmable option lets you adjust the intensity of low to high via the app which work great with LED bulbs that are suggested to be dimmable also in order to avoid flickering. The Meross 3-way Switch works great with Google Assistant, Alexa, Samsung Smart Things and Apple Home Kit. I will continue to be a customer of Meross as long as they continue with good quality products, good customer service and creative ideas. Im hoping their next product in development is a 2 in 1 Smart Ceiling Fan Control And Dimmer Light Switch available from their competitor, because I dont want to go to another company just for that product. Thanks again Meross and heed my suggestion and hopefully theres a market for it.

I installed this switch in my bathroom in about 20 minutes. Note, it does require a neutral wire. Set up is very easy, and the switch does exactly what its supposed to do. One of my recommendations is that the firmware be updated so that when the light switch is off, pushing any of the 3 buttons would turn it on. Right now, the switch only turns on if the bottom button is pressed. For guests that might be fumbling around in the dark for a light switch, they may have some trouble turning this on if they are used to the rocker style switch. My other recommendation is that one of the LED light be illuminated when the switch is of, to aid in finding it in a dark room. My z-wave switches have this option and it can be enabled or disabled. Overall, if youre looking for a single pole smart dimming wifi switch with Alexa and Google control, you cant really go wrong with this item for under $25.

This is a great upgrade to our old sliding dimmer switch. It works without a problem with the app and Alexa. “Alexa, turn on light” “Alexa, 50% (or whatever % you want) light” “Alexa, turn the light off” It saves the last (dimmer) setting when you turn it off. So if you have it 10% light output then you turned it off, the next time you turn it on it’ll be at 10% light output. -I like that- Installation is pretty straightforward -make sure you have the Meross app and you’re logged in. Make sure the main power switch is turned off!!- the switch wires are well labeled. The app has a step by step guide to get you through. Or if you’re a handy diy-er, you’ll get it installed in less than 5 minutes. If you are starting your smart home project, I highly recommend Meross’ product. They have a lot to get you started and they all work with just one app(!) and all of them (the ones I purchased -garage door opener, smart plugs, smart switch-) works with Alexa.

Received the product a few weeks ago. I was able to connect it to my foyer chandelier and works exactly as I had hoped. Im now able to turn it on that light with my Alexa echo as well as dim it to the setting I would like. It was easy to install (just in case, I did some extra YouTube researching on how to install but the Meross App did explain how to connect it pretty well). Once connected, everything worked as intended. The Amazon listing was helpful and very informational about the product.