Never Fall Complete Sink Repair system

My kitchen sink fell into the cabinets below on the first day of the COVID-19 lockdown in my town. The silicon glue that held the sink in place had failed. After a few panicked expletives, I started researching options to fix my sink. Luckily, I found some online videos and reviews of the Never Fall system. I ordered it and it arrived with Prime delivery three days later. Within twenty minutes of opening the package, my sink was back in place! I sealed around the edge of the sink with silicon caulk for moisture-proofing, but otherwise the Never Fail hardware is the only thing holding my sink up now, and it is doing a great job so far! I used both side brackets as well as the front optional bracket because, well, if the hardware comes with it, I might as well use it. Ill update this review if I ever have any issues with the hardware over time.

Easy to install, highly suggest!

My sink has been supported by some upright 2 X 4s wedged between the cabinet bottom and the sink bottom for several years because the adhesive that held it to the granite came loose. I tried several fixes but nothing worked. I was getting ready to call a sink installer and spend hundreds of $$ probably, along with having to disconnect the plumbing - what a hassle!! I did a search for fixing under counter sinks and this product popped up. I saw the video and it appeared to be EXACTLY what I needed. Turns out that it was. Just finished installing and caulking the sink. It is pulled up tight and I figure it will outlast me. The self-adhesive backing on the support plates that screw into the cabinet are invaluable! It is difficult working under a sink and you really need three hands. The adhesive backing worked perfectly so I could then come back and screw in the support without trying to hold the plate with one hand and the drill with the other. The front sink clip that holds the front of the sink up worked like a charm too. Easy to install and I could not be happier with this product. Great engineering. Thanks!

Over four years ago when I had to buy a house because of divorce, my friend who is a plumber warned me that my kitchen sink wasnt braced. I thought, oh well, Ill deal with it when I have to. About a month ago the separation between my under-mount sink and granite counter tops was growing and now I was really worrying it was going to simply fall at some point. Bought these and installed them in about 30 minutes! Thats including the time it takes to remove all of the cleaning supplies accumulated over 4 years! I didnt even need the center brace as the sink is small, not deep and with the silicone is definitely done and wont EVER come apart again! Whats better is that my friend asked me for the link because of my satisfaction! He says he can buy these and charge folks $350 every time he uses them for the same repair. So if you want a simple, sturdy way to repair your falling sink and want to save over $300 for doing it yourself these are the braces for you! So happy with this decision.

So after seeing a video on YouTube for this it looked like the perfect solution. That said, for my install the arms were too bulky/awkward to work with the tight space I had. The arms kept flopping down and because there is a lot of play side to side in how they are connected if you need to approach your sink at an odd angle they basically slide out of place. I avoided the simpler other types of these kits on Amazon thinking they would be cheap junk but really I think their simpler design (only allowing movement up and down, not side to side) would allow for less play and a better install in tighter areas.

We woke up New Years morning to find our stainless steel kitchen sink had come unglued and dropped into the base cabinet - disposal and all. I am somewhat handy but could not figure out how to fix this. The original install used some kind of clips and a rail system that had pulled loose taking a bit of the cabinet with it. I had my licensed plumber look at it and he also had no ideas. So... off to you tube and amazon and after seeing a lot of ideas that I knew would not work in my situation I came upon this system. After removing all of the old mounting stuff and cleaning the old caulk off of the sink and counter these were fairly straightforward to install. My sink is now re- caulked and back in place and I feel like it is more secure than before. Thanks for the thoughtful design and the added touch of the adhesive on the back... made it a lot easier to install. Great product that I would highly recommend.

For a DIYer, this is essential. It allowed me to lower the sink so I could scrape and clean away all the old gunk. Then it made installing it up to counter height very easy. For a one-man DIY job, this is worth EVERY penny. For that matter, I bet pros would use it too, as some reviewers stated. I did have to disconnect the elbow joints to give it more freedom to move up and down. Didnt want to risk cracking these old pipes. Also, having 3 supports works fine: the two rods on the side, and the front-under-counter doohickey. I installed using the 2 rods. Afterward, I added the front support. I also ended up putting a 1x2 in the back to provide a 4th point of support. It doesnt get in the way, so why not? But I wouldnt say it is necessary. This kit provides everything you need.

This product did what it needed to do to repair a bad installation by a licensed contractor. I installed it myself with absolutely no issues. It says it can support over 600 lbs and I believe it. Cant believe that the contractor didnt use something similar to this. But as long as their poor installation lasts until the warranty expires, they are happy.

So I put this install/repair off for a few months because honestly I was nervous about getting this item installed to fix the sink. 2x4 pieces were doing just fine under the sink. Right? Well I couldn’t have been more wrong. Easy to understand instructions and easy to use apparatus led to the longest part was running to hardware store because I was out of clear silicone for the remount. I know each sink set up is different but I would probably use these to install on a new construction cabinet before the old style clips. Very sturdy and came with adhesive strips to mount it prior to securing with screws hassle free. Would recommend this item 100%!!

Love this sink support kit. Our sink had dropped. I had watched Youtube videos and I had ordered a kit we found on Amazon. However, on rewatching videos I saw the Never Fail Complete Sink Repair System. Checked it and order it. So, after two years of delay I had the sink fixed in 30 minutes. This system is simple to use (install). I lifts the sink into place. Supports the sink in the middle. My wife is happy, and I cam out looking good. Recommend this kit, watch video on Youtube and you will see what I mean. Well worth every penny, but dont raise the price because of my review.